Combined heat and power using high-temperature proton exchange membrane fuel cells for housing facilities
10.1109/ETFA45728.2021.9613460
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/365085
Tipus de documentText en actes de congrés
Data publicació2021
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
ProjecteCONTROL Y GESTION DE ENERGIA EN VEHICULOS ELECTRICOS HIBRIDOS CON PILAS DE COMBUSTIBLE (AEI-RTI2018-096001-B-C32)
CONTROL Y GESTION DE ENERGIA EN VEHICULOS ELECTRICOS HIBRIDOS CON PILAS DE COMBUSTIBLE (AEI-RTI2018-096001-B-C32)
CONTROL Y GESTION DE ENERGIA EN VEHICULOS ELECTRICOS HIBRIDOS CON PILAS DE COMBUSTIBLE (AEI-RTI2018-096001-B-C32)
Abstract
Recently, new alternatives to conventional energy sources such as fossil fuels are arising due to global problems related to climate change effect and energy shortage. In this context, fuel cells and combined heat and power technologies appear as a possible solution due to their ability to provide both electrical and thermal energy more efficiently compared to traditional methods. Related to this, high-temperature proton exchange membrane fuel cells offer the possibility of implementing combined heat and power systems, and they are also considered an efficient technology that emits less greenhouse gases. In this article a model predictive control based energy management system for a specific house is presented. Simulation and control models of the system are presented, together with dimensions and energy profiles used. Finally, control objectives and the proposed control algorithm are detailed, and the results when trying to match residential heat and power demands are discussed.
Descripció
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
CitacióSanz, V. [et al.]. Combined heat and power using high-temperature proton exchange membrane fuel cells for housing facilities. A: IEEE International Conference on Emerging Technologies and Factory Automation. "Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) Västerås, Sweden, online 07-10 September, 2021". Institute of Electrical and Electronics Engineers (IEEE), 2021, p. 1-8. ISBN 978-1-72812-989-1. DOI 10.1109/ETFA45728.2021.9613460.
ISBN978-1-72812-989-1
Versió de l'editorhttps://ieeexplore.ieee.org/document/9613460
Col·leccions
- Departament d'Enginyeria de Sistemes, Automàtica i Informàtica Industrial - Ponències/Comunicacions de congressos [1.500]
- Departament de Matemàtiques - Ponències/Comunicacions de congressos [1.080]
- ACES - Control Avançat de Sistemes d'Energia - Ponències/Comunicacions de congressos [230]
- SAC - Sistemes Avançats de Control - Ponències/Comunicacions de congressos [582]
- Doctorat en Automàtica, Robòtica i Visió - Ponències/Comunicacions de congressos [166]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
2524-Combined-h ... -housing-facilities(1).pdf | 396,7Kb | Visualitza/Obre |