Design of a bistatic SAR processor for GEOSAR systems
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/125085
Tipus de documentTreball Final de Grau
Data2018-10
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This document is an investigation about GEOSAR technology and possible methods that improve the performance especially by accurately pointing or focusing the antenna towards the target. Results obtained show that this accuracy can be evaluated through several parameters, being the entropy of the SAR image one of the most consistent. A gradient descent is implemented as means to focus the image by optimizing the entropy of the SAR image. The application of this procedure known as ?autofocus? has a wide variety of applications and can be used in different systems if more precision is needed. In this case, the autofocus designed is very forgiving in terms of computational cost, but is very generous with its accuracy. Este documento consiste en una investigación sobre la tecnología GEOSAR y posibles metodologías para obtener un mejor funcionamiento al mejorar el apuntado hacia el objetivo del mismo. Los resutados obtenidos demuestran que dicha precisión se puede medir con buena fidelidad a través de la entropía de la imagen SAR obtenida. Este mismo resultado se utiliza a posteriori para mejorar el apuntado de las antenas del sistema mediante un gradiente descendiente. Dicho apuntado es conocido como "autofocus" o autoapuntado, y varía en función de la aplicación y resultados deseados. En este caso se ha diseñado un autoapuntado muy económico en términos de coste computacional a cosa de pero precisión. Aquest document consisteix en una investigació sobre la tecnologia GEOSAR i possibles mètodes que milloren el seu funcionament millorant l'apuntat de l'antena cap al seu objectiu. Els resultats demostren que la precisió d'aquest apuntat es pot mesurar fidelment amb l'entropia de la imatge SAR generada. Aquest mateix resultat s'utilitza més endavant per implementar un algoritme que millora l'apuntat del sistema. Aquest procediment de millora de l'apuntat es coneix com a "autofocus" o autoapuntat, i canvia en funció de la precisió i cost computacional desitjat. En aquest cas, s'ha dissenyat un sistema que es molt econòmic en termes de cost computacional a canvi de manca de precisió.
Descripció
Conventional radar remote sensing is based on Low Earth Orbit (LEO) satellites with a tytpical revisit time of 10-30 days. To achieve permanent radar monitoring for meteorological applications or natural hazards monitoring a continuous acquisition from Geostationary satellites is required. In the preparation of a future European Geostationary Radar mission new techniques of Synthetic Aperture Radar formation must be studied. The proposed TFG addresses the proposal, simulation and validation of a Geostationary SAR (GEOSAR) Processor. The existing tranmissions of telecommuni
MatèriesSynthetic Aperture Radar, Artificial satellites, Radar d'obertura sintètica, Radar espacial, Satèl·lits artificials
TitulacióGRAU EN CIÈNCIES I TECNOLOGIES DE TELECOMUNICACIÓ (Pla 2010)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Design of a bis ... sor for GEOSAR systems.pdf | 2,930Mb | Visualitza/Obre |