Cerca
Ara es mostren els items 1-10 de 147
Synthesis and characterization of PET polymer resin for your application in concrete
(Institute of Research Engineers and Doctors (the IRED), 2014)
Text en actes de congrés.
Accés restringit per decisió de l'autor
Text en actes de congrés.
Accés restringit per decisió de l'autor
Due to the problem that represents the accelerated production of waste from the consumption of polyethylene
terephthalate (PET), it becomes necessary to look for alternative solutions; chemical recycling is a suitable ...
Factors affecting smouldering combustion of bio-based thermal insulation materials
(2015)
Text en actes de congrés.
Accés obert
Text en actes de congrés.
Accés obert
The present paper presents further results of an on-going research previously exposed in the first
COST FP1404 meeting in April 2015. The research focuses on the analysis of the smouldering
combustion of an innovative ...
Rehabilitación de cubiertas del centro de promociones económicas, en el Prat de Llobregat (Barcelona)
(Colegio Oficial de Arquitectos de Galicia, 2012)
Text en actes de congrés.
Accés restringit per política de l'editorial
Text en actes de congrés.
Accés restringit per política de l'editorial
Comportamieto físico y mecánico de agregados naturales y reciclados en concreto permeable
(2014)
Text en actes de congrés.
Accés obert
Text en actes de congrés.
Accés obert
Inject more water into the subsoil is very important, because when the ground water
level is below capacity, causing settlements on the ground. Coupled with this, concrete
recycling is an effective way to remove debris ...
Evaluación y comparación de los materiales usados como elementos de divisoria interiores de vivienda, mediante la simulación y evaluación de sus residuos. Caso de usos en Sinaloa, México
(2015)
Text en actes de congrés.
Accés obert
Text en actes de congrés.
Accés obert
Se analizó y realizó un comparativo de los consumos de materiales entre dos sistemas de separación de muros verticales interiores: tabique de cerámica y block hueco de mortero-cemento, profundizando en el estudio del ámbito ...
Strength and durability parameters of an environmentally friendly concrete
(American Concrete Institute (ACI), 2012)
Comunicació de congrés.
Accés restringit per política de l'editorial
Comunicació de congrés.
Accés restringit per política de l'editorial
Due to the significant environmental impact that the concrete production causes, and as a contribution to sustainability of this industry; presently sorne of the concrete constituents are replaced with alternative recycled ...
Estudio físico, químico y microestructural de geopolímeros base ceniza volante
(2015)
Text en actes de congrés.
Accés obert
Text en actes de congrés.
Accés obert
En este trabajo se analizó el comportamiento físico, químico y microestructural de la ceniza volante
activada alcalinamente. Para ello fueron utilizados diferentes tamaños de partícula de ceniza
volante (CV), obtenidos ...
Addition of microencapsulated PCM into single layer mortar: physical and thermal properties and fire resistance
(2014)
Text en actes de congrés.
Accés obert
Text en actes de congrés.
Accés obert
The energy consumption in buildings has increased in the last years due to the energy demand
for thermal comfort. The improvement of thermal properties in building materials is one of the
key points to achieve a reduction ...
Use of wastes to create new building materials
(2013)
Comunicació de congrés.
Accés obert
Comunicació de congrés.
Accés obert
This paper is a teaching activity carried out on the subject of Building Materials from Building Engineering studies. This subject is developed in the second year and lasts for a four month period. The student teacher ratio ...
Diseño y caracterización de mezclas EVA/plastómero para su empleo en compuestos de aislamiento acústico
(2010-06-23)
Comunicació de congrés.
Accés restringit per política de l'editorial
Comunicació de congrés.
Accés restringit per política de l'editorial
En el desarrollo de materiales aislantes acústicos para sectores como la automoción, se utilizan habitualmente compuestos poliméricos con un contenido en cargas inorgánicas superior al 70% en peso. Este hecho obliga a ...