Mostra el registre d'ítem simple
Diseño y montaje de un medidor de potencia de radiofrecuencia
dc.contributor | Montoro López, Gabriel |
dc.contributor.author | Vázquez Groba, Avelino |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions |
dc.date.accessioned | 2014-07-31T07:42:12Z |
dc.date.available | 2014-07-31T07:42:12Z |
dc.date.issued | 2014-03-04 |
dc.identifier.uri | http://hdl.handle.net/2099.1/22200 |
dc.description.abstract | This project describes the creation of a power meter developed by MATLAB program. Once finished, the system must be able to provide information on the RMS (both Volts and dBm) of a given signal, the user must also show the signal in question and its power spectrum, which can be smoothed by a filter selectable low pass. In essence it will be its purpose though, to complement the task is added to the "power meter" an envelope detector. Thus, we can extract information from modulated signal amplitude, then any possible interference filter and measure the resulting energy to allow subsequent tasks. |
dc.language.iso | spa |
dc.publisher | Universitat Politècnica de Catalunya |
dc.rights | Attribution-NonCommercial-ShareAlike 3.0 Spain |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-sa/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria de la telecomunicació::Radiocomunicació i exploració electromagnètica::Circuits de microones, radiofreqüència i ones mil·limètriques |
dc.subject.lcsh | Radio frequency |
dc.subject.other | Potencia |
dc.subject.other | RF |
dc.title | Diseño y montaje de un medidor de potencia de radiofrecuencia |
dc.type | Bachelor thesis |
dc.rights.access | Open Access |
dc.date.updated | 2014-03-07T06:36:42Z |
dc.audience.educationlevel | Estudis de primer/segon cicle |
dc.audience.mediator | Escola d'Enginyeria de Telecomunicació i Aeroespacial de Castelldefels |
dc.audience.degree | ENGINYERIA TÈCNICA DE TELECOMUNICACIÓ, ESPECIALITAT EN SISTEMES DE TELECOMUNICACIÓ (Pla 2000) |