Exploració per tema "Design"

Ara es mostren els items 61-80 de 312

    • Design of a basic module for emergency situations: project of a fast deployable transitional shelter unit for emergency situations 

      Sieiro Torruella, Marc (Universitat Politècnica de Catalunya, 2015-07)
      Treball Final de Grau
      Accés obert
      This Bachelor thesis attempts to give a better solution to a increasing problem due to permanent people relocation. A unit prepared to give shelter and comfort with standard living characteristics will be designed in terms ...

    • Design of a drinking water treatment plant based on natural coagulants in the community of “El Choro” (Bolivia) 

      Pedregal Montes, Angela; García Fayos, Beatriz; Arnal, José Miguel (OmniaScience, 2021-03)
      Text en actes de congrés
      Accés obert

    • Design of a Formula Student race car tubular chassis 

      García Dávila, David; Arasa Sánchez, Laura (Universitat Politècnica de Catalunya, 2021-07-02)
      Treball Final de Grau
      Accés restringit per decisió de l'autor
      L'objectiu del projecte es crear una guia que ajudi qualsevol estudiant amb formació tècnica a dissenyar i construir un xassís tubular d'un cotxe fórmula d'estudiants. A la memòria es detallen tots els passos i processos ...

    • Design of a full-colors FDM 3D printer: key technical possibilities 

      Elmessaoudi, Driss; Elyessefi, Assiya; Buj Corral, Irene; ElMesbahi, Jihad; El Mrabet, Mhamed; Boulaala, Mohammed; Elmesbahi, Abdelilah (Springer, 2023-12-14)
      Article
      Accés restringit per política de l'editorial
      3D printing technology is considered as a promising, with applications in a wide range of industries, including aerospace engineering, automotive, and biomedicine. Since the introduction of this technology, a number of 3D ...

    • Design of a hypersonic airbreathing cruise missile 

      Graells Pina, Eduard (Universitat Politècnica de Catalunya, 2019-09-02)
      Treball Final de Grau
      Accés obert
      In this project, a hypersonic airbreathing cruise missile is designed through an optimization process. The main use of this futuristic weapon technology is to be employed against enemy ships while being launched from an ...

    • Design of a launch system for a scientific fix wing UAV without undercarriage 

      Surroca Garcia, Aleix (Universitat Politècnica de Catalunya, 2021-06)
      Treball Final de Grau
      Accés obert
      The general objective is to design the electric system of a vehicle (‘dolly’ type) for take-off of scientific fix wing UAV without undercarriage. The system shall ensure stability of the dolly/aircraft during rolling-take-off ...

    • Design of a low-cost high voltage rectifier for experiments with DC arcs 

      Guerra Calvo, Víctor (Universitat Politècnica de Catalunya, 2024-02-05)
      Treball Final de Grau
      Accés obert
      This project involves the evaluation and comparison of various methods for high voltage DC generation, within the context of DC arc experimentation. A method will be selected and subsequently implemented into a functional ...

    • Design of a prototype for the in situ forming of a liquid infused preform (ISFLIP) process 

      Juan Muñoz, Jaime; Salán Ballesteros, Maria Núria; Silva, Arlindo; Tornero, José Antonio (2020-01)
      Article
      Accés obert
      The world is changing and demanding stronger, lighter and more versatile materials. Taking advantage of the full potential of these materials also requires versatile manufacturing processes. The in situ forming of a liquid ...

    • Design of a pump head with automatic gas purge valve 

      Ghailan Tribak, Mounir (Universitat Politècnica de Catalunya, 2022-06-29)
      Treball Final de Grau
      Accés obert
      El funcionament de les bombes dosificadores es pot veure indesitjablement interromput quan aquestes operen amb gasos que apareixen inoportunament al capçal d’aquestes bombes, invalidant completament la funció de dosificació ...

    • Design of a segmented switched reluctance drive for a light electric vehicle 

      Andrada Gascón, Pedro (2022-09-01)
      Article
      Accés obert
      The light electric vehicle market requires better performance motors with less or even without permanent magnets. Switched reluctance motors (SRM) are among the best placed to meet this goal, despite they have lower power ...

    • Design of a vehicle for the World Solar Challenge 

      Truque Bertran, Albert (Universitat Politècnica de Catalunya, 2023-07-13)
      Treball Final de Grau
      Accés obert
      This project focuses on designing a theoretical prototype for the World Solar Challenge (WSC) that emphasizes energy efficiency, innovation, and sustainability. Extensive research and analysis of previous WSC designs have ...

    • Design of an Automatic Testing Equipment (ATE) for Low-Mid Power DC-DC Converters. 

      March Martínez, Carlos (Universitat Politècnica de Catalunya, 2023-05-11)
      Projecte Final de Màster Oficial
      Accés obert
      This project describes the creation of an Automatic Test Equipment to verify DC to DC converters under 500W of power in End of Line. To do this, there are few parts which will be considered, being these the gathering of ...

    • Design of an autonomous drone for agricultural control 

      Turcoman, Alexandru (Universitat Politècnica de Catalunya, 2023-02-08)
      Treball Final de Grau
      Accés obert
      This thesis presents the design and application of a new innovative drone capable of monitoring large agricultural fields of any type of crop up to 50 ha. The drone can operate fully autonomously and is designed to have a ...

    • Design of an injection mould 

      Pérez Garcia, Daniel (Universitat Politècnica de Catalunya, 2018-06)
      Treball Final de Grau
      Accés obert

    • Design of FRC tunnel segments considering the ductility requirements of the Model Code 2010 

      Liao, Lin; Fuente Antequera, Albert de la; Pialarissi Cavalaro, Sergio Henrique; Aguado de Cea, Antonio (2015-03)
      Article
      Accés obert
      Fibre reinforced concrete (FRC) is used to improve the mechanical response of precast segments for tunnels. The structural use of the material has been regulated by national codes and, recently, by the Model Code 2010 (MC ...

    • Design of micropiles for tunnel face reinforcement: undrained upper bound solution 

      Pinyol Puigmartí, Núria Mercè; Alonso Pérez de Agreda, Eduardo (2012-01)
      Article
      Accés restringit per política de l'editorial
      The stability of tunnel faces supported by an umbrella of subhorizontal micropiles is analyzed by means of the upper bound theorem of plasticity. The micropiles are considered beams subjected to the kinematic motion imposed ...

    • Design of packaging solutions using recycled textile waste as raw materials 

      Farran Huguet, Júlia (Universitat Politècnica de Catalunya, 2022-02-09)
      Treball Final de Grau
      Accés obert
      Aquest projecte estudia l'aplicació del reciclatge mecànic de tèxtils de roba per a nadons per tal d'obtenir un teixit per a una solució de packaging reutilitzable. Els residus utilitzats en el procés de reciclatge són ...

    • Design of small interfaces 

      Garvin, Kevin; González Angeles, Fernanda; Ruegger Magalhães Neves, Raíssa; Santos Monteiro, Larissa (Universitat Politècnica de Catalunya, 2013-06)
      Treball Final de Grau
      Accés restringit per decisió de l'autor
      Many modern devices with different kinds of characteristics have been invading the market in recent years and nowadays the market place is flooded with them.Users are experiencing a storm of new technology and a massive ...

    • Design of Steel Fibre Reinforced Concrete Structures according to the Annex L of the Eurocode-2 2023 

      Fuente Antequera, Albert de la; Monserrat López, Andrea; Tošić, Nikola; Serna Ros, Pedro (Elsevier, 2023-06)
      Article
      Accés obert
      The Annex L of FprEN 1992-1-1:2023 (EC-2) provides provisions for the design of Steel Fibre Reinforced Concrete (SFRC) structures. This Annex is supported by a comprehensive background document (BD) that gathers the main ...

    • Developing an augmented reality application in the framework of architecture degree 

      Sánchez Riera, Alberto; Redondo Domínguez, Ernesto; Fonseca Escudero, David (Association for Computing Machinery (ACM), 2012)
      Text en actes de congrés
      Accés obert
      We describe the development, implementation and evaluation of an augmented reality (AR) application for mobile devices. It has been particularly intended to be used in educational environments. This application has been ...