Show simple item record

dc.contributorRaush Alviach, Gustavo Adolfo
dc.contributorCodina Macià, Esteban
dc.contributor.authorBrujas Llimargas, Alejandro
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Mecànica de Fluids
dc.coverage.spatialeast=-4.7803963; north=37.8972527; name=Av. Cruz de Juárez, 16, 14006 Córdoba, Espanya
dc.date.accessioned2020-07-01T07:06:09Z
dc.date.available2020-07-01T07:06:09Z
dc.date.issued2020-04
dc.identifier.urihttp://hdl.handle.net/2117/192052
dc.description.abstractthe present work studies how to determine the best combined dimensions of control variables to achieve an optimal mass flowrate in order the better damping performance on radio-controlled vehicles. According to this, we are going to design a DOE based on Taguchi´s (10) to measure the influence of fluid viscosity (μ), perimeter holes diameter (PHD), centre hole diameter (CHD) and hole length (HL) of different drilled plates used as a critical part of a RC vehicle damper. This DOE design will be L16 with three control variables already described and a fixed value (μ, WAGNERSIL S200). On the other hand, drilled plates will be 3d printed and self-designed by CAD, using ARTILLERY SIDEWINDER X1 “fdm” printing system.
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica::Mecànica de fluids
dc.subject.lcshAutomobiles -- Shock absorbers
dc.subject.lcshMétodes de Taguchi (Control de qualitat)
dc.subject.otherRC vehicles
dc.subject.otherDamper
dc.subject.otherTaguchi
dc.subject.otherANOVA
dc.subject.otherMinitab
dc.subject.otherSilicone oil
dc.subject.otherDrilled plate
dc.titleStatistical analysis of silicone oil flow through drilled plates used in RC cars
dc.typeBachelor thesis
dc.subject.lemacMinitab
dc.subject.lemacAutomòbils -- Amortidors
dc.subject.lemacTaguchi, Mètodes (Control de qualitat)
dc.identifier.slugPRISMA-150157
dc.rights.accessOpen Access
dc.date.updated2020-06-24T18:32:57Z
dc.audience.educationlevelGrau
dc.audience.mediatorEscola Superior d'Enginyeries Industrial, Aeroespacial i Audiovisual de Terrassa
dc.audience.degreeGRAU EN ENGINYERIA MECÀNICA (Pla 2009)
dc.contributor.covenanteeevoPRINT3D


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder