Implementing data-dependent triangulations with higher order delaunay triangulations
Visualitza/Obre
ijgi-06-00390.pdf (2,275Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/114278
Tipus de documentArticle
Data publicació2017-12-01
EditorMultidisciplinary Digital Publishing Institute (MDPI)
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The Delaunay triangulation is the standard choice for building triangulated irregular networks (TINs) to represent terrain surfaces. However, the Delaunay triangulation is based only on the 2D coordinates of the data points, ignoring their elevation. This can affect the quality of the approximating surface. In fact, it has long been recognized that sometimes it may be beneficial to use other, non-Delaunay, criteria that take elevation into account to build TINs. Data-dependent triangulations were introduced decades ago to address this exact issue. However, data-dependent trianguations are rarely used in practice, mostly because the optimization of data-dependent criteria often results in triangulations with many slivers (i.e., thin and elongated triangles), which can cause several types of problems. More recently, in the field of computational geometry, higher order Delaunay triangulations (HODTs) were introduced, trying to tackle both issues at the same time—data-dependent criteria and good triangle shape—by combining data-dependent criteria with a relaxation of the Delaunay criterion. In this paper, we present the first extensive experimental study on the practical use of HODTs, as a tool to build data-dependent TINs. We present experiments with two USGS 30m digital elevation models that show that the use of HODTs can give significant improvements over the Delaunay triangulation for the criteria previously identified as most important for data-dependent triangulations, often with only a minor increase in running times. The triangulations produced have measure values comparable to those obtained with pure data-dependent approaches, without compromising the shape of the triangles, and can be computed much faster.
CitacióRodríguez, N., Silveira, R.I. Implementing data-dependent triangulations with higher order delaunay triangulations. "International Journal of Geo-Information", 1 Desembre 2017, vol. 6, núm. 12, p. 1-21.
ISSN2220-9964
Versió de l'editorhttp://www.mdpi.com/2220-9964/6/12/390
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
ijgi-06-00390.pdf | 2,275Mb | Accés restringit |