Designing and testing of a corona discharge ignition device
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2099.1/22547
Tipus de documentProjecte/Treball Final de Carrera
Data2014-05
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Ignition systems have fundamentally remained unchanged since the dawn of the internal combustion engine industry. In order to respond to new legislation, the necessary improvement on fuel economy and lowering emissions, new technologies are being considered to attain increasingly strict parameters.
One of such technologies is the use of a corona discharge ignition system. Corona discharge or partial discharge is a phenomenon where high voltage combined with high frequency and high spatial gradient creates an ionic plasma region around the electrode with high ionizing effect on the surrounding medium.
This phenomenon has been recorded and studied in the past, but has only recently been proposed as an ignition source, with several interesting advantages over century-old sparkplug arc ignition technology.
The matter of this thesis is to analyze the physics of the phenomenon, to construct a device capable of performing measurements on the phenomenon, and ultimately to test if such an ignition device is possible and useful in the industry.
Furthermore, any results determined by this thesis will be able to set a starting point for further research on the matter.
ProvinençaAquest document conté originàriament altre material i/o programari no inclòs en aquest lloc web
TitulacióENGINYERIA INDUSTRIAL (Pla 1994)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
140430 - GBP PFC Memoir.pdf | Report | 4,025Mb | Visualitza/Obre |