Exploració Articles de revista per títol

Ara es mostren els items 1-20 de 50

    • A device for improving the immunity of AC contactor during voltage dips 

      Andrada Gascón, Pedro; Perat Benavides, Josep Ignasi; Navarro, Gustavo (2008-03)
      Article
      Accés obert
      This paper describes an electronic device that enables AC contactors to ride through power quality dsturbances. The proposed device is connected to the contactor coil and consists of a power conversion excitation and hold-in ...

    • A Novel Type of Hybrid Reluctance Motor Drive 

      Andrada Gascón, Pedro; Blanqué Molina, Balduino; Martínez Piera, Eusebio; Torrent Burgués, Marcel (Institute of Electrical and Electronics Engineers (IEEE), 2014-08-01)
      Article
      Accés restringit per política de l'editorial
      In this paper, a novel type of hybrid reluctance motor (HRM) drive is presented. This new motor is characterized by a stator formed by a combination of independent magnetic structures, each one composed of an electromagnet, ...

    • Accionamientos de reluctancia autoconmutados con control de par para dirección asistida eléctrica 

      Gomila González, Marcos; Sánchez López, José Antonio; Andrada Gascón, Pedro; Blanqué Molina, Balduino; Martínez Piera, Eusebio; Perat Benavides, Josep Ignasi; Torrent Burgués, Marcel (2016-05-01)
      Article
      Accés obert
      Nowadays, the power steering is a standard device in commercial vehicles. The electric power steering is becoming an alternative to the traditional hydraulic power steering. Right now, the electric drive commonly used in ...

    • An appropriate index to assess the global cancellation level of the harmonic currents consumed by a set of single-phase uncontrolled rectifiers and a set of fluorescent lamps 

      Mesas García, Juan José; Sainz Sapera, Luis; Monjo Mur, Lluís; Pedra Durán, Joaquim (2022-06-13)
      Article
      Accés obert
      An in-depth study of harmonic current reduction in European commercial buildings due to the harmonic cancellation effect when a set of single-phase uncontrolled rectifiers and a set of fluorescent lamps are connected at ...

    • An ultra-fast annealing treatment by electropulsing during pure copper wire drawing 

      González Rojas, Hernán Alberto; Sánchez Egea, Antonio José; Hameed, Saqib; Bolmaro, Raúl (Multidisciplinary Digital Publishing Institute (MDPI), 2019-11-23)
      Article
      Accés obert
      The influence of electropulses in situ on the drawing process of copper wires was investigated with the aim of avoiding time consuming annealing thermal treatments. It was found that with the application of electropulses, ...

    • Angular velocity analysis boosted by machine learning for helping in the differential diagnosis of Parkinson’s Disease and Essential Tremor 

      Loaiza Duque, Julián David; Sánchez Egea, Antonio José; Reeb, Theresa; González Rojas, Hernán Alberto; González Vargas, Andrés Mauricio (Institute of Electrical and Electronics Engineers (IEEE), 2020-05-11)
      Article
      Accés obert
      Recent research has shown that smartphones/smartwatches have a high potential to help physicians to identify and differentiate between different movement disorders. This work aims to develop Machine Learning models to ...

    • Application work using software tools and didactic equipment of electrical machines in electrical engineering studies 

      Torrent Burgués, Marcel; Martínez Piera, Eusebio; Perat Benavides, Josep Ignasi (2020-01-01)
      Article
      Accés obert
      This article describes the use of software tools and didactic equipment of electrical machines applied to the teaching in electrical engineering, specifically in the realization of an application work consisting of the ...

    • Assessing the environmental impact of induction motors using manufacturer's data and life cycle analysis 

      Torrent Burgués, Marcel; Martínez Piera, Eusebio; Andrada Gascón, Pedro (2012-09)
      Article
      Accés obert
      Herein is reported development and testing of a life cycle analysis (LCA) procedure for assessing the environmental impact of induction motors. The operating conditions of a given industrial application are defined by the ...

    • Assessment of Linear Switched Reluctance Motor's Design Parameters for Optimal Performance 

      Garcia Amoros, Jordi; Andrada Gascón, Pedro; Blanqué Molina, Balduino (2015-04-21)
      Article
      Accés obert
      This article presents an exhaustive study about the influence of some design parameters, such as the number of phases, pole stroke, and current density, in the behavior of a linear switched reluctance motor. The linear ...

    • Caracterización de motores de inducción para tracción ferroviaria a partir del circuito equivalente,incluyendo todas las pérdidas del motor 

      Torrent Burgués, Marcel; Perat Benavides, Josep Ignasi; Blanqué Molina, Balduino; Soriano Almodovar, Santiago (2015-01-01)
      Article
      Accés obert
      In this paper is intended to study a three phase induction motor for railway applications. The steady state equivalent circuit is used to include and quantify all motor losses in the power balance.; The use of the proposed ...

    • Centrales electricas minihidraulicas: aplicacion en una zona rural subdesarrollada 

      Castellano, Jaime; Torrent Burgués, Marcel (2009-07)
      Article
      Accés obert
      La implementación de microcentrales hidroeléctricas en zonas subdesarrolladas permite acceder a la energía eléctrica a comunidades rurales, cuando las dificultades para disponer del suministro a partir de las líneas ...

    • Comparative efficiency of switched reluctance and induction motor drives for slowly varying loads 

      Andrada Gascón, Pedro; Blanqué Molina, Balduino; Perat Benavides, Josep Ignasi; Torrent Burgués, Marcel; Martínez Piera, Eusebio; Sánchez López, José Antonio (2006-04)
      Article
      Accés obert
      A current-controlled switched reluctance motor drive for a variable speed applications with efficiency optimization is presented. Firing angles are computed online, the turn-on is calculated by means of the rule of Bose, ...

    • Corrosion behavior of an AISI/SAE steel cut by electropulsing 

      Montilla Montaña, Carlos Alberto; González Rojas, Hernán Alberto; Kallewaard Echeverri, Valentina; Tristancho Reyes, José Luis (Multidisciplinary Digital Publishing Institute (MDPI), 2019-11-18)
      Article
      Accés obert
      The effect of electropulsing treatment (EPT) on the surface general corrosion behavior of an AISI/SAE 1045 steel under different machining regimes is studied. In the study, the following variables are alternated: high-speed ...

    • Design of a novel modular axial-flux double rotor switched reluctance drive 

      Andrada Gascón, Pedro; Blanqué Molina, Balduino; Martínez Piera, Eusebio; Perat Benavides, Josep Ignasi; Sánchez López, José Antonio; Torrent Burgués, Marcel (2020-03-04)
      Article
      Accés obert
      Nowadays, there is a renewed interest in switched reluctance machines and especially in axial-flux switched reluctance machines (AFSRM). This paper presents a comprehensive design procedure for modular AFSRM with an inner ...

    • Design procedure for a longitudinal flux flat linear switched reluctance motor 

      Garcia Amoros, Jordi; Andrada Gascón, Pedro; Blanqué Molina, Balduino (2011-12-12)
      Article
      Accés restringit per política de l'editorial
      This article presents a new comprehensive design procedure for longitudinal flux flat linear switched reluctance motors. The design process comprises all the steps from detailing the specifications to sizing the prototype ...

    • Effect of electropulses on the machinability of a C45E steel 

      Montilla Montaña, Carlos; Kallewaard, Valentina; González Rojas, Hernán Alberto (2019-01-01)
      Article
      Accés obert
      This article compares the machinability of a C45E (AISI/SAE 1045) steel type under two different manufacturing processes: conventional machining and pulsed current assisted machining. The testing procedure consisted on the ...

    • Electric drives for light e-scooters 

      Andrada Gascón, Pedro; Blanqué Molina, Balduino; Martínez Piera, Eusebio; Torrent Burgués, Marcel; Perat Benavides, Josep Ignasi; Sánchez López, José Antonio (2013-03-28)
      Article
      Accés obert
      In the next years is expected an important rise in sales of electrical scooters in the entire world but especially in China. In order to address this challenge the electric scooter industry has to be more competitive in ...

    • Electromagnetic evaluation of an in-wheel double rotor axial-flux switched reluctance motor for electric traction 

      Andrada Gascón, Pedro; Martínez Piera, Eusebio; Torrent Burgués, Marcel; Blanqué Molina, Balduino (2017-04-01)
      Article
      Accés obert

    • Electropulsing effects on mechanical and metallurgical behavior of AISI-SAE 4140 steel 

      Montilla Montaña, Carlos A.; González Rojas, Hernán Alberto; Higuera Cobos, Oscar Fabián; Kallewaard, Valentina; Sánchez Egea, Antonio J (2018-10-02)
      Article
      Accés obert
      The electroplasticity phenomenon (EP) produces changes in the mechanical properties of a metal, due to the simultaneous application of mechanical stresses of compression, bending, etc., and high instantaneous current pulses. ...

    • Engineering education for sustainable development: The European Project Semester approach 

      Duarte, Abel José; Malheiro, Benedita; Arnó Macià, Elisabet; Perat Benavides, Josep Ignasi (2019-07-16)
      Article
      Accés restringit per política de l'editorial
      Contribution: An analysis of the extent to which sustainability is present in the syllabi, project briefs, report templates, and student final reports of the three Iberian European project semester (EPS) providers, over a ...