Creation of microburrs drilling constitute a potencial danger because their detachment can modificate the correct operation of a mechanism. The burrs must be eliminated completely in the case of pistons brake, ensuring a high productivity and a low cost. In this work has been studied the mechanism for the creation of microburrs in thru holes drilled (phi2, 02 mm) of a aluminium alloy piston AA6065-T9 in order to various parameters such as the type of drill bit, feedrate, cutting speed and lubrication, imposing a minimum feedrate of 450 mm/min not to reduce the current production. Creation of microburrs drilling is inevitable and several deburring processes have been analyzed for their total elimination. After a few first essays, It has been determined that in order that the deburring are effective must be worked with minimal and known position burrr drillings.
Enllaç a la versió editorial: http://scitation.aip.org/dbt/dbt.jsp?KEY=APCPCS&Volume=1181&Issue=1
CitationSalueña, X. [et al.]. Study of the generation of microburrs in the process of drilling and its subsequent elimination by deburring, of tubes cylindrical aluminium AA6065-T9. "AIP Conference proceedings", Gener 2010, vol. 1181, p. 521-530.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder. If you wish to make any use of the work not provided for in the law, please contact: email@example.com