Mostra el registre d'ítem simple
A simple approach for fast controller prototyping for a three phase interleaved DC-DC converter
dc.contributor.author | Gavriluta, Catalin |
dc.contributor.author | Citro, Costantino |
dc.contributor.author | Nisak, Khairul |
dc.contributor.author | Beltrán San Segundo, Héctor |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica |
dc.date.accessioned | 2013-05-16T12:30:03Z |
dc.date.created | 2012 |
dc.date.issued | 2012 |
dc.identifier.citation | Gavriluta, C. [et al.]. A simple approach for fast controller prototyping for a three phase interleaved DC-DC converter. A: IEEE International Symposium on Industrial Electronics. "ISIE 2012: proceedings of the IEEE International Symposium on Industrial Electronics". Hangzhou: 2012, p. 2015-2019. |
dc.identifier.isbn | 978-146730158-9 |
dc.identifier.uri | http://hdl.handle.net/2117/19293 |
dc.description.abstract | Initial control prototyping in power electronics is often a matter of trial and error because of the complicated mathematics involved in modeling systems based on their internal structure. Moreover, in practice, small changes as the introduction of a measurement filter or the change of the sensing system appear all the time. If the controller design method was based on the internal structure of the system, then these small changes would mean a re-iteration through all the cumbersome equations. This paper presents a simple methodology for fast control prototyping based on the approximation of the Bode plots. As prerequisites, a power electronics simulation software as PSIM is needed. The method is presented by taking as a study case the design of a current control loop of a 30kW three phase interleaved DC-DC converter. Simulations are presented for the different considered controllers, and finally the method is validated by experimental results. |
dc.format.extent | 5 p. |
dc.language.iso | eng |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència |
dc.subject.lcsh | Power electronics |
dc.title | A simple approach for fast controller prototyping for a three phase interleaved DC-DC converter |
dc.type | Conference lecture |
dc.subject.lemac | Electrònica de potència |
dc.identifier.doi | 10.1109/ISIE.2012.6237403 |
dc.relation.publisherversion | http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6237403&tag=1 |
dc.rights.access | Restricted access - publisher's policy |
local.identifier.drac | 11109827 |
dc.description.version | Postprint (published version) |
dc.date.lift | 10000-01-01 |
local.citation.author | Gavriluta, C.; Citro, C.; Nisak, K.; Beltrán, H. |
local.citation.contributor | IEEE International Symposium on Industrial Electronics |
local.citation.pubplace | Hangzhou |
local.citation.publicationName | ISIE 2012: proceedings of the IEEE International Symposium on Industrial Electronics |
local.citation.startingPage | 2015 |
local.citation.endingPage | 2019 |