Low flammability, foam-like materials based on ammonium alginate and sodium montmorillonite clay
Visualitza/Obre
Arxiu principal (1,155Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.polymer.2012.10.029
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/17211
Tipus de documentArticle
Data publicació2012-11-30
EditorElsevier
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Low flammability, foam-like materials based on bio-based, renewable ammonium alginate and sodium montmorillonite clay were fabricated through a simple, environmentally-friendly freeze-drying process in which water is used as solvent. These materials exhibit mechanical properties similar to those of rigid PU foams or balsa; the compressive modulus (1–97 MPa) and density (0.047–0.174 g/cm3) increase with increasing solids content, with an associated change from a layered to network microstructure structure. Calcium ions, either added directly or indirectly via CaCO3/gluconolactone (GDL) are an effective crosslinking agent for alginate, with the GDL route providing the greatest enhancement of mechanical properties. The thermal stability of the aerogels is also enhanced by the presence of crosslinking. The alginate/clay aerogels possess inherently low flammability, as measured by cone calorimetry, with heat release values decreasing as the proportion of clay in the composites is increased.
CitacióChen, H.B. [et al.]. Low flammability, foam-like materials based on ammonium alginate and sodium montmorillonite clay. "Polymer", 30 Novembre 2012, vol. 53, núm. 25, p. 5825-5831.
ISSN0032-3861
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S0032386112008853
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
1-s2.0-S0032386112008853-main.pdf | Arxiu principal | 1,155Mb | Accés restringit |