|dc.description.abstract||Wärtsilä ELAC Nautik is one major global player in the multibeam business.
The multibeam systems are marketed under the well-known brand name
SeaBeam, including systems for medium water depth and deep-water areas.
The ELAC SeaBeam 3012/3020 deep-water systems operate in the 12 kHz and
20 kHz frequency bands, whereas the ELAC SeaBeam 3030/3050 medium-depth
systems operate in the 30 kHz and 50 kHz frequency bands. While formerly
only continuous wave (CW) pulses were applied, the new Mk II series of the
ELAC SeaBeam 3030/3050 multibeam systems offer the possibility to apply
frequencymodulated (FM) pulses for increased measurement ranges, improved
range resolution and better data quality. FM pulses require a correlation of the
beamformed data of all beam directions with pulse replica in order to obtain
pulse compression. Additionally, Doppler shifts of the operating frequencies
induced by the ship’s movement have to be compensated. In order to obtain
unrivalled data quality, the ELAC SeaBeam 3030 / 3050 multibeam ystems apply
Doppler compensation not only on the bathymetric depth data, but also on
the water column imaging (WCI) data. In order to provide high data density,
all ELAC SeaBeam MBES can transmit two quasisimultaneous swaths per ping
cycle, which are frequency-separated. Compared to the singleping mode, the
data density is doubled. The ELAC SeaBeam 3030/3050 multibeam systems
include a functionality for to automatic cyclical steering of the transmitted
swaths in the along-ship direction. Via this functionality, which is called
“Advanced Transmission Beam Steering”, an entire volume below the vessel can
be insonified without requiring any movement of the vessel. The operator can
specify an angle range and an angle increment, resulting in a periodic oscillation
of the transmitted swaths from bow to aft and vice versa. This functionality is
very helpful for the detection and analysis of gas flares, leakages or other objects
in the water column during stationary vessel operation or on fixed platforms.
Wärtsilä ELAC Nautik GmbH Page 2 of 3 31. May 2016
On order to provide highest operational flexibility, the ELAC SeaBeam 3050
and ELAC SeaBeam 3030 are available as mobile systems, providing the sonar
electronics in flight cases and utilizing mobile transducer brackets for spatial
resolutions of 1.5° x 2° for ELAC SeaBeam 3050 and 3° x 2° for ELAC SeaBeam 3030.
Wärtsilä ELAC Nautik is the only supplier, offering a mobile 30 kHz multibeam
of the sea water profile and sea water surface will be designed, studied,
developed and applied to a real situation. A thermometer, based on distributed
temperature sensor, will be designed, paying special attention to the involved
materials, in order to avoid the damages of such corrosive environment.
Nowadays, this techique is used in many infraestructures as bridge or airports
by never has been used in sea, where the sea currents and biofouling are
problems that will are wtudied at the project. However the optical fibers must
been calibrated to know the uncertainty in temperature measure, and it is the
purpose of the paper.
system with a depth performance of more than 6,000 meters. Wärtsilä ELAC
Nautik is a main industrial partner within the German „Lighthouse“ Research
Project SUGAR (Submarine Gas Hydrate Reservoirs) and cooperates with the
GEOMAR Helmholtz Centre for Ocean Research Kiel. Wärtsilä ELAC Nautik
participates in a SUGAR subproject, which is related to gas flare detection.
Gas flares at the seabed are indicators for potential gas hydrate reservoirs and
potential leakages of gas deposits. Therefore, gas flare detection is important for
the exploration of submarine gas hydrates and for environmental monitoring.
Driven by the SUGAR project, the ELAC SeaBeam multibeam systems store
WCI data with very high resolution. For the online and offline visualization of
high-resolution WCI data, the ELAC WCI Viewer is utilized, providing different
window types for data visualization, different scaling and range options,
forward and backward data playback as movies or single pictures, object and
event functionalities and the display of external sensor data. These capabilities
help to identify and analyze any kinds of objects in the water column or on the
bottom (e.g. gas seeps).
Despite helpful aids for the online visualization of high-resolution WCI data,
there is a need for an automatic processing of WCI data with respect to object
detection. Such automatic processing will reduce the workload of survey
operators significantly. Therefore, Wärtsilä ELAC Nautik has developed an
automatic object detector (ELAC AOD) which is dedicated to gas flares in the
water column. Due to the huge data volumes of high-resolution WCI data, the
development of the ELAC AOD was ambitious and challenging. The ELAC AOD
was implemented within the MATLAB development environment. The ELAC AOD
is dedicated to WCI data from ELAC SeaBeam 3030 and 3050 medium-depth
multibeam systems and stores all relevant information of detected objects in
so-called object log files. It is possible to import such object log files into the
ELAC WCI Viewer for visualization purposes. Due to the above-mentioned
characteristics, multibeam systems from Wärtsilä ELAC Nautik are excellently
applicable in order to detect and analyze gas flares in the water column. The
presentation will provide detailed system information and important data