Simulation of rockfall fragmentation mechanism in a GIS-based tool
Visualitza/Obre
article submitted (736,8Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/99470
Tipus de documentText en actes de congrés
Data publicació2016
EditorCRC Press
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Rockfalls are frequent instability processes in road cuts, open pit mines and quarries, steep slopes and cliffs. The attitude and persistency of joints within the rock mass define the size of kinematically unstable rock volumes. Furthermore, the rock block will eventually split in several fragments during its propagation downhill due its impact with the ground surface. Knowledge of the size, energy and trajectory of each block resulting from fragmentation is critical in determining the hazard of buildings and protection structures.
The objective of this study is to simulate stochastically the fragmentation mechanism in rockfall propagation trajectories and in the calculation of impact energies in a GIS-Based tool which includes common modes of motion for falling boulders. A stochastic fragmentation model is proposed and tested to determine if it can simulate the fragmentation phenomena properly.
CitacióMatas, G., Lantada, N., Corominas, J., Gili, J. Simulation of rockfall fragmentation mechanism in a GIS-based tool. A: ISRM International Symposium. "Rock Mechanics & Rock Engineering: From the Past to the Future". Cappadocia: CRC Press, 2016, p. 671-675.
ISBN978-1-138-03265-1
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
EUROCK_2016_submission_378_Matas_et_al2016.pdf | article submitted | 736,8Kb | Accés restringit |