Reports de recerca
Recent Submissions
-
Solucions de construcció de baix cost basades en terra i fibres vegetals per a països en desenvolupament
(2024-07)
Research report
Open Access -
ASHVIN Use Case: Digital twining of concrete consolidation quality process
(2024-04-08)
Research report
Open AccessA specific model is developed by Digital Twin Technologies (DTT) and the Polytechnic University of Catalunya (UPC) for real-time monitoring of vibration quality to proactively address concrete consolidation issues. -
ASHVIN Use Case: Digital twin enabled multi physics simulation and model matching
(2024-04-08)
Research report
Open AccessContextualizing information between multi-physics simulations and vaster information constructs such as digital twins. 3D geometries, measurements, simulations, and asset management coexist in such information constructs. -
Smart restoration with particle infused repointing (101023384) - Technical Report
(2022-11-18)
Research report
Open AccessThe main research objectives of the project are: 1. to develop and test a mortar for masonry repair and strengthening, primarily for existing and architectural heritage structures, 2. …characterized by enhanced fracture ... -
D5.2: Digital-Twin Enabled multi-physics simulation and model matching
(2023-05-12)
Research report
Open AccessThis deliverable presents a report on the developed actions and results concerning Digital-Twin-enabled multi-physics simulations and model matching. Enabling meaningful simulations within new human-infrastructure interfaces ... -
WindCrete Mooring Fairlead Design
(2021-06-01)
Research report
Restricted access - confidentiality agreementThe purpose of this document is to describe the procedure carried out for the design of the Windcrete mooring system anchoring to the floating platform. The scope of this design is limited to site B of COREWIND project ... -
D4.3: Digital Twin supported lean project planning, control and risk management
(2022-09-28)
Research report
Open AccessThere is a considerable opportunity to improve the planning and control of construction work. The construction industry is still struggling to adopt to the digital revolution’s concepts due to complexity, uncertainty, the ... -
3D strut-and-tie modeling for design of drilled shaft footings
(2022)
Research report
Open AccessA comprehensive study was conducted to characterize the structural response and develop design guidelines for drilled shaft footings. The study included large-scale testing and numerical analyses of footing specimens ... -
Pre-normative recommendations for the system-based direct design of stainless steel frames using advanced analysis
(2022-09)
Research report
Open AccessThe research project NewGeneSS, the acronym of “NEW GENEration design methods for Stainless steel Structures” was financed by the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie ... -
BIM-friendly, as-built realistic imperfections for geometrically nonlinear analysis of tubular frames
(2020-11-27)
Research report
Restricted access - publisher's policyThis document presents an integration of measurement-to-design procedures related to structural analysis of tubular frames. TLS-based data-gathering and the automated transformation of the corresponding point clouds to ... -
D5.1 SHM digital twin requirements for residential, industrial buildings and bridges
(2022-03)
Research report
Open AccessThis deliverable presents a report of the needs for structural control on buildings (initial imperfections, deflections at service, stability, rheology) and on bridges (vibrations, modal shapes, deflections, stresses) based ... -
Alternate reinforcements for enhanced corrosion resistance in TxDOT bridges: final report
(2021-08)
Research report
Restricted access - publisher's policyThe corrosion of reinforcing steel in concrete is the leading cause of deterioration for reinforced concrete structures, especially bridges exposed to external chlorides. Practitioners and researchers have evaluated and ...
RSS 1.0