Mostra el registre d'ítem simple

dc.contributorObiol Sánchez, Agustí
dc.contributorGómez Serrano, José
dc.contributor.authorCostales Calvo, Ignacio
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Estructures a l'Arquitectura
dc.date.accessioned2012-12-18T12:35:55Z
dc.date.available2012-12-18T12:35:55Z
dc.date.issued2012-09-19
dc.identifier.citationCostales Calvo, I. El Pretensado en las estructuras de acero. Tesi doctoral, UPC, Departament d'Estructures a l'Arquitectura, 2012. DOI 10.5821/dissertation-2117-94688.
dc.identifier.urihttp://hdl.handle.net/2117/94688
dc.description.abstractEn 1879 nace Eugène Freyssinet, padre reconocido del hormigón pretensado. Cuarenta años antes de su nacimiento, ingenieros americanos ya habían empezado a pretensar perfiles de hierro fundido, para evitar que cuando éstos entrasen en tracción, se quebraran. Ciento setenta años después el hormigón armado pretensado se estudia en centenares de artículos, revistas especializadas y tesis doctorales diversas, mientras que el acero pretensado no ha tenido el mismo desarrollo desde unos cincuenta años atrás. Raras son las ocasiones dónde se llega a justificar que pretensar una estructura metálica es necesario y razonable económicamente. Si nos centramos en estructuras de edificación, aún serán menos estas ocasiones. La presente tesis estudia la historia de las estructuras metálicas pretensadas, la mayoría de edificación, algunas de ellas a fondo, como las recientemente construidas en Catalunya. También se repasan las posibilidades que el pretensado metálico ofrece al consultor de estructuras, completándolo con algunos ejemplos. Se ofrece un análisis pormenorizado de la viga Fink, con especial cuidado en su predimensionado y en el cálculo tanto manual, como matricial. Se incluye un análisis de refuerzo de techos formados por viguetas reforzadas trasnversalmente por una viga que cambia su rigidez según criterio del proyectista. Al final se desarrolla una solución de unión de viga y pilar metálico unidos mediante tendones pretensados, para facilitar el montaje en obra, resolviendo las holguras gracias a la unión mediante nudos semirrígidos.
dc.description.abstractEugène Freyssinet, born in 1879, is the acknowledged father of prestressed concrete. Forty years before his birth, American Engineers had begun to prestress cast iron profiles to prevent them from breaking after entering in tension. One hundred and seventy years after prestressed concrete is studied in hundreds of articles, journals and diverse dissertations, while prestressing of steel has not had the same development since about fifty years ago. Rare are the occasions where the technician is able to justify that prestressing steel structures is necessary and economically reasonable. If we are considering building structures, these occasions to presstress the structure will be even less. This thesis studies the history of prestressed steel structures, some of them in depth, as some of thoses recently built in Catalonia. It also reviews the possibilities that metallic prestressed structures offer to the consultant, including some examples. It provides a detailed analysis of the Fink truss beam, with special care in their pre-dimensioning and calculation both manually as matrix. It includes an analysis of strengthening reinforced slabs, with a beam that changes its stiffness at the discretion of the designer. Eventually it develops a joint solution of a beam and a steel column, connected by prestressed tendons, to make assembly easier, meeting the gaps with the connection by means of semi-rigid joints.
dc.format.extent402 p.
dc.language.isospa
dc.publisherUniversitat Politècnica de Catalunya
dc.rightsL'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.sourceTDX (Tesis Doctorals en Xarxa)
dc.subjectÀrees temàtiques de la UPC::Arquitectura
dc.subject.otherprefabricado pretensado
dc.subject.othercálculo en segundo orden
dc.subject.otheruniones semirrígidas
dc.subject.othergrandes luces
dc.subject.otherhistoria de las estructuras
dc.subject.otherestructuras metálicas pretensadas
dc.subject.othercálculo matricial
dc.subject.otherpestressed steel structures
dc.subject.otherlightweight structures
dc.subject.otherhistory of the structures
dc.subject.otherlarge span structures
dc.subject.othersemi-rigid joints
dc.titleEl Pretensado en las estructuras de acero
dc.typeDoctoral thesis
dc.subject.lemacAcer pretesat de construcció
dc.subject.lemacConstruccions metàl·liques
dc.identifier.doi10.5821/dissertation-2117-94688
dc.identifier.dlB. 34461-2012
dc.rights.accessOpen Access
dc.description.versionPostprint (published version)
dc.identifier.tdxhttp://hdl.handle.net/10803/96778


Fitxers d'aquest items

Thumbnail

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple