Show simple item record

dc.contributorCodina Macià, Esteban
dc.contributorCastilla López, Roberto
dc.contributor.authorCampo Sud, David del
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Mecànica de Fluids
dc.date.accessioned2012-06-04T12:41:46Z
dc.date.available2012-06-04T12:41:46Z
dc.date.issued2012-04-27
dc.identifier.citationCampo Sud, D. D. "Analysis of the suction chamber of external gear pumps and their influence on cavitation and volumetric efficiency". Tesi doctoral, UPC, Departament de Mecànica de Fluids, 2012.
dc.identifier.urihttp://hdl.handle.net/2117/94595
dc.description.abstractHydraulic machines are faced with increasingly severe performance requirements. The need to design smaller and more powerful machines rotating at higher speeds in order to provide increasing efficiencies, has to face a major limitation: cavitation. A two-dimensional numerical approach, by means of Computational Fluid Dynamics (CFD), has been developed for studying the effect of cavitation in the volumetric efficiency of external gear pumps. Several cavitation models and grid deformation algorithms have been studied, and a method for simulating the contact between solid boundaries has been developed. The velocity field in the inlet chamber has also been experimentally measured by means of Time-Resolved Particle Image Velocimetry (TRPIV) and results have been compared to the numerical ones in order to validate the accuracy of the model. Our two-dimensional model is not able to predict the real volumetric efficiency of the pump, since several simplifications are involved in it. Nevertheless, this model shows to be valid to understand the complex flow patterns that take place inside the pump and to study the influence of cavitation on volumetric efficiency. The influence of the rotational speed of the pump has been analyzed, as well as the effect of the geometry of the inlet chamber, the working pressure, the inlet pressure loss factor, and the flow leakage through the radial clearances of the pump between gears and casing.
dc.format.extent223 p.
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya
dc.rightsL'accés als continguts d'aquesta tesi queda condicionat a l'acceptació de les condicions d'ús establertes per la següent llicència Creative Commons: http://creativecommons.org/licenses/by-nc-sa/3.0/es/
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/es/
dc.sourceTDX (Tesis Doctorals en Xarxa)
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica
dc.subject.otherBombas de engranajes
dc.subject.otherCavitación
dc.subject.otherCFD
dc.subject.otherRendimiento volumétrico
dc.subject.otherMecánica de fluidos
dc.subject.otherComputacional
dc.subject.otherPIV
dc.titleAnalysis of the suction chamber of external gear pumps and their influence on cavitation and volumetric efficiency
dc.typeDoctoral thesis
dc.identifier.dlB. 20044-2012
dc.rights.accessOpen Access
dc.description.versionPostprint (published version)
dc.identifier.tdxhttp://hdl.handle.net/10803/81558


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Except where otherwise noted, content on this work is licensed under a Creative Commons license: Attribution-NonCommercial-ShareAlike 3.0 Spain