UPCommons està en procés de migració del dia 10 fins al 14 Juliol. L’autentificació està deshabilitada per evitar canvis durant aquesta migració.
Influence of eccentricity on roughness distributions in side milling

View/Open
Cita com:
hdl:2117/90021
Document typeArticle
Defense date2016-06-01
Rights accessOpen Access
This work is protected by the corresponding intellectual and industrial property rights.
Except where otherwise noted, its contents are licensed under a Creative Commons license
:
Attribution-NonCommercial-NoDerivs 3.0 Spain
Abstract
In this paper, a numerical model was used based on the tool-piece geometric intersection, which enables the determination of a roughness profile as a function of feed, tool radii and tool eccentricity in side milling processes. Average roughness R-a and peak-to-valley roughness R-t were obtained for a group or family of tools, defined by an average radius value and a standard deviation value of all tool radii. The Monte Carlo method was used to generate N random combinations of radius values for each family, according to a normal distribution. The model was validated by means of experimental tests. For each family of tools, roughness distributions were obtained at different feed values and for different eccentricity values. It was found that the higher eccentricity, the more asymmetrical roughness distributions become.
CitationBuj, I., Vivancos, J., Gonzalez-Rojas, Hernan A. Influence of eccentricity on roughness distributions in side milling. "Machining science and technology", 1 Juny 2016, vol. 20, núm. 2, p. 187-200.
ISSN1091-0344
Publisher versionhttp://www.tandfonline.com/doi/full/10.1080/10910344.2016.1165834
Files | Description | Size | Format | View |
---|---|---|---|---|
Postprint.pdf | 316,6Kb | View/Open |