Reliability versus mass optimization of CO2 extraction technologies for long duration missions
Rights accessOpen Access
The aim of this paper is to optimize reliability and mass of three CO2 extraction technologies/components: the 4-Bed Molecular Sieve, the Electrochemical Depolarized Concentrator and the Solid Amine Water Desorption. The first one is currently used in the International Space Station and the last two are being developed, and could be used for future long duration missions. This work is part of a complex study of the Environmental Control and Life Support System (ECLSS) reliability. The result of this paper is a methodology to analyze the reliability and mass at a component level, which is used in this paper for the CO2 extraction technologies, but that can be applied to the ECLSS technologies that perform other tasks, such as oxygen generation or water recycling, which will be a required input for the analysis of an entire ECLSS. The key parameter to evaluate any system to be used in space is mass, as it is directly related to the launch cost. Moreover, for long duration missions, reliability will play an even more important role, as no resupply or rescue mission is taken into consideration. Each technology is studied as a reparable system, where the number of spare parts to be taken for a specific mission will need to be selected, to maximize the reliability and minimize the mass of the system. The problem faced is a Multi-Objective Optimization Problem (MOOP), which does not have a single solution. Thus, optimum solutions of MOOP, the ones that cannot be improved in one of the two objectives, without degrading the other one, are found for each selected technology. The solutions of the MOOP for the three technologies are analyzed and compared, considering other parameters such as the type of mission, the maturity of the technology and potential interactions/synergies with other technologies of the ECLSS.
CitationDetrell, G., Griful, E., Messerschmid, E. Reliability versus mass optimization of CO2 extraction technologies for long duration missions. "Advances in space research", 1 Juny 2016, vol. 57, núm. 11, p. 2337-2346.