Show simple item record

dc.contributor.authorColet Subirachs, Alba
dc.contributor.authorGomis Bellmunt, Oriol
dc.contributor.authorClos Costa, Daniel
dc.contributor.authorMartín Segura, Guillermo
dc.contributor.authorJunyent Ferré, Adrià
dc.contributor.authorVillafafila Robles, Roberto
dc.contributor.authorVillafafila Robles, Roberto
dc.contributor.authorFerrer Martí, Laia
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
dc.date.accessioned2010-09-14T14:25:01Z
dc.date.available2010-09-14T14:25:01Z
dc.date.created2010-06-01
dc.date.issued2010-06-01
dc.identifier.citationColet Subirachs, A. [et al.]. Electromechanical modelling and control of a micro-wind generation system for isolated low power DC micro grids. "EPE journal", 01 Juny 2010, vol. 20, núm. 2, p. 42-48.
dc.identifier.issn0939-8368
dc.identifier.urihttp://hdl.handle.net/2117/8859
dc.description.abstractThis paper describes the modelling and control of a micro-wind generation system, based on an axial flux permanent magnet synchronous generator (PMSG), for isolated low power DC micro grids. The system consists of a micro-wind turbine including a furling tail, a PMSG, a three phase diode rectifier and a buck converter connected to a battery bank and a load. Furthermore, it incorporates a control system to extract the maximum power output from the wind turbine using the minimum possible number of sensors. The system is simulated in Matlab/Simulink to analyze the dynamical response and it is compared with the current IT-PE-100.
dc.format.extent7 p.
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica
dc.subject.lcshElectronic engineering
dc.subject.lcshWind energy
dc.titleElectromechanical modelling and control of a micro-wind generation system for isolated low power DC micro grids
dc.typeArticle
dc.subject.lemacEnginyeria electrònica
dc.subject.lemacEnergia eòlica
dc.contributor.groupUniversitat Politècnica de Catalunya. CITCEA - Centre d'Innovació Tecnològica en Convertidors Estàtics i Accionaments
dc.contributor.groupUniversitat Politècnica de Catalunya. EOLI - Enginyeria d'Organització i Logística Industrial
dc.relation.publisherversionhttps://www.epe-association.org/epe/users/documents.download.php?type=view&documents_id=12001
dc.rights.accessOpen Access
local.identifier.drac2748899
dc.description.versionPostprint (published version)
local.citation.authorColet Subirachs, A.; Gomis-Bellmunt, O.; Clos, D.; Martin, G.; Junyent, A.; Villafafila-Robles, R.; Villafáfila-Robles, R.; Ferrer-Martí, L.
local.citation.publicationNameEPE journal
local.citation.volume20
local.citation.number2
local.citation.startingPage42
local.citation.endingPage48


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution-NonCommercial-NoDerivs 3.0 Spain