Show simple item record

dc.contributor.authorFernández Pérez, Ignasi
dc.contributor.authorBairán García, Jesús Miguel
dc.contributor.authorMarí Bernat, Antonio Ricardo
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Civil i Ambiental
dc.date.accessioned2016-06-08T13:30:17Z
dc.date.available2018-08-01T00:30:18Z
dc.date.issued2016-07
dc.identifier.citationFernández, I., Bairan, J.M., Mari, A. Mechanical model to evaluate steel reinforcement corrosion effects on s-e and fatigue curves. Experimental calibration and validation. "Engineering structures", Juliol 2016, vol. 118, p. 320-333.
dc.identifier.issn0141-0296
dc.identifier.urihttp://hdl.handle.net/2117/87800
dc.description.abstractAn experimental study to characterise the annular distribution of the mechanical properties throughout the cross-section of TEMPCORE® steel bars is presented. Thereafter a sectional fibre model, which allows obtaining s–e and fatigue curves of corroded steel, is described. The model is calibrated using an extensive experimental study of artificially corroded steel bars tested under cyclic and monotonic loads. Local pitting effects such as stress concentration, local bending or non-uniform material properties distribution are considered. Validation of the model is done using different experimental work in the literature, which encompassed naturally and artificially corroded bars, for both fatigue and tensile tests.
dc.format.extent14 p.
dc.language.isoeng
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria civil::Materials i estructures::Materials i estructures de formigó
dc.subject.lcshSteel bars--Corrosion
dc.subject.lcshFiber-reinforced concrete
dc.subject.otherSteel reinforced concrete
dc.subject.otherMass loss
dc.subject.otherPitting corrosion
dc.subject.otherModelling studies
dc.subject.otherCorroded tensile propeties
dc.subject.otherCorroded fatigue properties
dc.titleMechanical model to evaluate steel reinforcement corrosion effects on s-e and fatigue curves. Experimental calibration and validation
dc.typeArticle
dc.subject.lemacConstrucció en formigó armat amb fibres d'acer
dc.subject.lemacAcer -- Corrosió
dc.contributor.groupUniversitat Politècnica de Catalunya. ATEM - Anàlisi i Tecnologia d'Estructures i Materials
dc.identifier.doi10.1016/j.engstruct.2016.03.055
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://www.sciencedirect.com/science/article/pii/S0141029616300906
dc.rights.accessOpen Access
local.identifier.drac17744549
dc.description.versionPostprint (author's final draft)
local.citation.authorFernández, I.; Bairan, J.M.; Mari, A.
local.citation.publicationNameEngineering structures
local.citation.volume118
local.citation.startingPage320
local.citation.endingPage333


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record