Mostra el registre d'ítem simple
Experience on a low cost way to obtain Al-Ti ceramic foams
dc.contributor.author | Cusidó Fàbregas, Joan Antoni |
dc.contributor.author | Cremades Oliver, Lázaro Vicente |
dc.contributor.author | González Benítez, María Margarita |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Física |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria de Projectes i de la Construcció |
dc.date.accessioned | 2016-05-12T11:47:09Z |
dc.date.available | 2016-05-12T11:47:09Z |
dc.date.issued | 2015-08 |
dc.identifier.citation | Cusido, J., Cremades, L.V., Gonzalez, M. Experience on a low cost way to obtain Al-Ti ceramic foams. "Materials Research Ibero-American Journal of Materials", Agost 2015, vol. 18, núm. 4, p. 769-774. |
dc.identifier.issn | 1980-5373 |
dc.identifier.uri | http://hdl.handle.net/2117/87010 |
dc.description.abstract | An experience on a simple process for producing alumina-rutile-mullite ceramic foams by using aqueous particulate slurries is proposed. The sintering process is achieved in one unique thermal process at 1200 ºC in air. The description of the process, physical properties and morphological studies are reported. Microstructure is studied by using confocal optical microscopic technique. The highly active porous foam structure of this ceramic material produced according to the low-cost process presented here could extend its use in a broad range of applications, such as catalytic, biomedical scaffolds, filtering, etc. |
dc.format.extent | 6 p. |
dc.language.iso | eng |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Edificació::Materials de construcció::Materials ceràmics de construcció |
dc.subject.lcsh | Matériaux céramiques |
dc.subject.other | Ceramic foam |
dc.subject.other | Replica technique |
dc.subject.other | Alumina |
dc.subject.other | Rutile |
dc.subject.other | Mullite |
dc.subject.other | Confocal microscopy |
dc.title | Experience on a low cost way to obtain Al-Ti ceramic foams |
dc.type | Article |
dc.subject.lemac | Materials ceràmics |
dc.contributor.group | Universitat Politècnica de Catalunya. GIIP - Grup de Recerca en Enginyeria de Projectes: Disseny i Sostenibilitat |
dc.identifier.doi | 10.1590/1516-1439.023615 |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Open Access |
local.identifier.drac | 16920515 |
dc.description.version | Postprint (published version) |
local.citation.author | Cusido, J.; Cremades, L.V.; Gonzalez, M. |
local.citation.publicationName | Materials Research Ibero-American Journal of Materials |
local.citation.volume | 18 |
local.citation.number | 4 |
local.citation.startingPage | 769 |
local.citation.endingPage | 774 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
Articles de revista [360]
-
Articles de revista [2.208]
-
Articles de revista [142]