Benchmarking selection of parameter values for the Barcelona basic model
Rights accessOpen Access
Seven teams took part in a benchmarldng exercise on selection of parameter values for the Barcelona Basic Model (BBM) from experimental data on an unsaturated soil. All teams were provided with experimental results from 9 tests performed on a compacted soil in order to determine values for the ten BBM soil constants and an initial value for the hardening parameter. The coordinating team then performed simulations (at stress point level) with the 7 different sets of parameter values, in order to explore the implications of the differences in parameter values and hence to investigate the robustness of existing BBM parameter value selection procedures. The major challenge was found to be selection of values for the constants lambda(0), r, beta, N(0) and p(c) and an initial value for the hardening parameter (p) over bar (0)(0), with the various teams proposing significantly different values for some of these key parameters. A key lesson emerging from the exercise is the importance of choosing a method for selecting values for the parameters beta and p(c) which places the main emphasis on attempting to optimise the match to the experimental spacing of normal compression lines at different values of suction. (C) 2015 Elsevier B.V. All rights reserved.
CitationD'Onza, F., Wheeler, S.J., Gallipoli, D., Hofmann, M., Lloret, M., Lloret, A., Mancuso, C., Pereira, J.M., Romero, E., Toll, D.G., Vassallo, R. Benchmarking selection of parameter values for the Barcelona basic model. "Engineering geology", Setembre 2015, vol. 196, p. 99-118.