Mostra el registre d'ítem simple

dc.contributor.authorSaeed, Umar
dc.contributor.authorRocadenbosch Burillo, Francisco
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions
dc.date.accessioned2016-03-17T13:52:34Z
dc.date.issued2015
dc.identifier.citationSaeed, U., Rocadenbosch, F. Exploiting the structure of MWR-derived temperature profile for stable boundary-layer height estimation. A: SPIE International Symposium - Remote Sensing Europe. "Remote Sensing of Clouds and the Atmosphere XX: 23-24 September 2015, Toulose, France". Amsterdam: International Society for Photo-Optical Instrumentation Engineers (SPIE), 2015, p. 1-8.
dc.identifier.isbn9781628418507
dc.identifier.urihttp://hdl.handle.net/2117/84630
dc.description.abstractA method for the estimation of Stable Boundary Layer Height (SBLH) using curvature of the potential temperature profiles retrieved by a Microwave Radiometer (MWR) is presented. The vertical resolution of the MWR-derived temperature profile decreases with the height. A spline interpolation is carried-out to obtain a uniformly discretized temperature profile. The curvature parameter is calculated from the first and second order derivatives of the interpolated potential temperature profile. The first minima of the curvature parameter signifies the point where the temperature profile starts changing from the stable to the residual conditions. The performance of the method is analyzed by comparing it against physically idealized models of the stable boundary-layer temperature profile available in the literature. There are five models which include stable-mixed, mixed-linear, linear, polynomial and exponential. For a given temperature profile these five models are fitted using the non-linear least-squares approach. The best fitting model is chosen as the one which fits with the minimum root-mean-square error. Comparison of the SBLH estimates from curvature-based method with the physically idealized models shows that the method works qualitatively and quantitatively well with lower variation. Potential application of this approach is the situation where given temperature profiles are significantly deviant from the idealized models. The method is applied to data from a Humidity-and-Temperature Profiler (HATPRO) MWR collected during the HD(CP)2 Observational Prototype Experiment (HOPE) campaign at Jülich, Germany. Radiosonde data, whenever available, is used as the ground-truth.
dc.format.extent8 p.
dc.language.isoeng
dc.publisherInternational Society for Photo-Optical Instrumentation Engineers (SPIE)
dc.subjectÀrees temàtiques de la UPC::Enginyeria de la telecomunicació
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Instrumentació i mesura
dc.subject.lcshRadiometers
dc.subject.lcshMicrowave communication systems
dc.subject.otherStable boundary layer
dc.subject.otherMicrowave radiometer
dc.subject.otherPotential temperature
dc.subject.otherCoarse resolution
dc.subject.otherCurvature method
dc.subject.otherIdealized physical models
dc.titleExploiting the structure of MWR-derived temperature profile for stable boundary-layer height estimation
dc.typeConference lecture
dc.subject.lemacRadiometria
dc.subject.lemacMicroones -- Mesurament
dc.contributor.groupUniversitat Politècnica de Catalunya. RSLAB - Grup de Recerca en Teledetecció
dc.identifier.doi10.1117/12.2195122
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://spie.org/Publications/Proceedings/Paper/10.1117/12.2195122
dc.rights.accessRestricted access - author's decision
local.identifier.drac17526947
dc.description.versionPostprint (author's final draft)
dc.date.lift10000-01-01
local.citation.authorSaeed, U.; Rocadenbosch, F.
local.citation.contributorSPIE International Symposium - Remote Sensing Europe
local.citation.pubplaceAmsterdam
local.citation.publicationNameRemote Sensing of Clouds and the Atmosphere XX: 23-24 September 2015, Toulose, France
local.citation.startingPage1
local.citation.endingPage8


Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple