Study of partial cavitation on a plane-convex hydrofoil with mesh development by using gmsh free software
Visualitza/Obre
asme2eKo.pdf (1,196Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/83359
Tipus de documentText en actes de congrés
Data publicació2015
EditorAmerican Society of Mechanical Engineers
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Commercial programs are widely used to do unstructured and structured meshes for CFD simulations. However, grids and meshes based on free-open source software (FOSS) give to researchers and engineers the possibility to adapt and improve the meshing process for special study cases with a high Reynolds numbers, such as unsteady partial cavitating flows. In order to improve the grid qualities, the FOSS GMSH has been used to do three types of grid, unstructured hexahedral mesh, hybrid mesh and structured hexahedral mesh for the simulation of partial cavitation around a plane-convex hydrofoil. Numerical simulations have been carried out by using the FOSS OpenFOAM based on the Zwart cavitation model and the implicit large eddy simulation (ILES). The results show that the structured mesh provides the best simulating to experimental data. On the other hand, the hybrid mesh induces unreliable results at leading edge without shedding.
CitacióHidalgo, V., Luo, X., Escaler, X., An, Y., Valencia, E. Study of partial cavitation on a plane-convex hydrofoil with mesh development by using gmsh free software. A: ASME/JSME/KSME Joint Fluids Engineering Conference. "Proceedings of the ASME/JSME/KSME Joint Fluids Engineering Conference 2015". Seoul: American Society of Mechanical Engineers, 2015, p. 1-7.
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
asme2eKo.pdf | 1,196Mb | Accés restringit |