Show simple item record

dc.contributor.authorFormela, Krzysztof
dc.contributor.authorSulkowski, Michal
dc.contributor.authorReza Saeb, Mohammad
dc.contributor.authorColom Fajula, Xavier
dc.contributor.authorHaponiuk, Josef T
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Química
dc.date.accessioned2016-02-18T10:19:03Z
dc.date.available2018-03-01T01:30:34Z
dc.date.issued2016-03-01
dc.identifier.citationFormela, K., Sulkowski, M., Reza Saeb , M., Colom, X., Haponiuk, J.T. Assessment of microstructure, physical and thermal properties of bitumen modified with LDPE/GTR/elastomer ternary blends. "Construction & building materials", 01 Març 2016, vol. 106, p. 160-167.
dc.identifier.issn0950-0618
dc.identifier.urihttp://hdl.handle.net/2117/83089
dc.description.abstractLDPE/GTR/elastomer ternary blends with variable LDPE/GTR ratio and constant elastomer content were prepared via melt-compounding. Obtained LDPE/GTR/elastomer blends were applied as thermoplastic modifiers into bitumen. Microstructure, physical and thermal properties of the modified bitumen were determined. It was observed that chemical composition of LDPE/GTR/elastomer blends has significant influence on their density and rheological behavior, which are also main factors affecting the dispersion of LDPE/GTR/elastomer blends into bitumen matrix and interfacial interactions between used components. Microstructure and thermal behavior of modified bitumen confirmed that physical interactions between bitumen and LDPE/GTR/elastomer blends are limited with increasing content of GTR. This phenomenon is due to mainly cross-linked structure of GTR and its low flowability. The conducted investigations showed that interfacial interactions between of thermoplastic modifier and bitumen, therefore the conventional and thermal properties of modified bitumen can be improved and easily modified by changing composition of LDPE/GTR/elastomer blends
dc.format.extent8 p.
dc.language.isoeng
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subjectÀrees temàtiques de la UPC::Enginyeria química
dc.subject.lcshTires, Rubber
dc.subject.lcshRubber--Analysis
dc.subject.lcshBitumen--Analysis
dc.subject.lcshRecycling
dc.subject.lcshThermoplastic composites
dc.subject.otherGTR
dc.subject.otherGround tire rubber
dc.subject.otherModified bitumen
dc.subject.otherRecycling
dc.subject.otherThermoplastic blends
dc.subject.otherExtrusion
dc.titleAssessment of microstructure, physical and thermal properties of bitumen modified with LDPE/GTR/elastomer ternary blends
dc.typeArticle
dc.subject.lemacPneumàtics -- Reciclatge
dc.subject.lemacCautxú -- Extrusió
dc.subject.lemacBetum
dc.subject.lemacTermoplàstics
dc.subject.lemacReciclatge (Residus, etc.) -- Materials
dc.contributor.groupUniversitat Politècnica de Catalunya. POLQUITEX - Materials Polimérics i Química Téxtil
dc.identifier.doi10.1016/j.conbuildmat.2015.12.108
dc.relation.publisherversionhttp://www.sciencedirect.com/science/article/pii/S0950061815307790
dc.rights.accessOpen Access
local.identifier.drac17427842
dc.description.versionPostprint (author's final draft)
local.citation.authorFormela, K.; Sulkowski, M.; Reza Saeb, M.; Colom, X.; Haponiuk, J.T
local.citation.publicationNameConstruction & building materials
local.citation.volume106
local.citation.startingPage160
local.citation.endingPage167


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record