Show simple item record

dc.contributor.authorMiret Tomàs, Jaume
dc.contributor.authorCastilla Fernández, Miguel
dc.contributor.authorMatas Alcalá, José
dc.contributor.authorGuerrero Zapata, Josep Maria
dc.contributor.authorVásquez Quintero, Juan Carlos
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria de Sistemes, Automàtica i Informàtica Industrial
dc.date.accessioned2010-07-20T11:24:59Z
dc.date.available2010-07-20T11:24:59Z
dc.date.created2009-08-11
dc.date.issued2009-08-11
dc.identifier.citationMiret, J. [et al.]. Selective harmonic-compensation control for single-phase active power filter with high harmonic rejection. "IEEE transactions on industrial electronics", 11 Agost 2009, vol. 56, núm. 8, p. 3117-3127.
dc.identifier.issn0278-0046
dc.identifier.urihttp://hdl.handle.net/2117/8278
dc.description(c) 2009 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.
dc.description.abstractThis paper presents a linear current control scheme for single-phase active power filters. The approach is based on an outer voltage loop, an inner current loop, and a resonant selective harmonic compensator. The design of the control parameters is carried out using conventional linear techniques (analysis of loop gain and other disturbance-rejection transfer functions). The performance of the proposed controller is evaluated and compared with two reference controllers: a basic control and an advanced repetitive control. In comparison with these controllers, the proposed control scheme provides additional attenuation to the harmonics coming from the load current, the grid voltage, and the reference signal, resulting in a grid current with lower harmonic distortion. Experimental results are reported in order to validate this paper.
dc.format.extent11 p.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència::Circuits de potència
dc.subject.lcshHarmonics (Electric waves)
dc.subject.lcshVoltage regulators
dc.subject.lcshCapacitors, Synchronous
dc.titleSelective harmonic-compensation control for single-phase active power filter with high harmonic rejection
dc.typeArticle
dc.subject.lemacSistemes elèctrics de potència -- Control
dc.contributor.groupUniversitat Politècnica de Catalunya. SEPIC - Sistemes Electrònics de Potència i de Control
dc.description.peerreviewedPeer Reviewed
dc.rights.accessOpen Access
local.identifier.drac2596107
dc.description.versionPostprint (updated version)
local.citation.authorMiret, J.; Castilla, M.; Matas, J.; Guerrero, J.; Vásquez, J.C.
local.citation.publicationNameIEEE transactions on industrial electronics
local.citation.volume56
local.citation.number8
local.citation.startingPage3117
local.citation.endingPage3127


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder