Selective harmonic-compensation control for single-phase active power filter with high harmonic rejection
Rights accessOpen Access
This paper presents a linear current control scheme for single-phase active power filters. The approach is based on an outer voltage loop, an inner current loop, and a resonant selective harmonic compensator. The design of the control parameters is carried out using conventional linear techniques (analysis of loop gain and other disturbance-rejection transfer functions). The performance of the proposed controller is evaluated and compared with two reference controllers: a basic control and an advanced repetitive control. In comparison with these controllers, the proposed control scheme provides additional attenuation to the harmonics coming from the load current, the grid voltage, and the reference signal, resulting in a grid current with lower harmonic distortion. Experimental results are reported in order to validate this paper.
(c) 2009 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.
CitationMiret, J. [et al.]. Selective harmonic-compensation control for single-phase active power filter with high harmonic rejection. "IEEE transactions on industrial electronics", 11 Agost 2009, vol. 56, núm. 8, p. 3117-3127.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder