Texture and lattice distortion study of an Al-6061-T6 alloy produced by ECAP
Visualitza/Obre
M2015200.pdf (2,082Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.2320/matertrans.M2015200
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/82669
Tipus de documentArticle
Data publicació2015-11
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Equal channel angular pressing (ECAP) is a severe plastic deformation (SPD) technique that produces nanostructured materials. Based on a remarkable grain size reduction, this process has led to improve mechanical properties, such as yield strength, fatigue, UTS, etc. In this work the characterization of the microstructure of the aluminum 6061-T6 alloy; plastically deformed up to ¾ µ 6, by the ECAP process, following route Bc, is presented. For this purpose, the ECAP processed samples were characterized by means of X-ray diffraction (for texture and line pro fi le analysis) and transmission electron microscopy. The initial crystallographic texture vanished after one ECAP pass and a new, well de fi ned, shear texture C ª was generated. For the subsequent ECAP passes, more shear components: A 1 ª , B ª and B ª were also developed. From the orientation distribution function analysis, a shift (generally less than 15°) between some experimental maxima and the reported ideal shear texture positions was observed. From these results, it was found that the microstructure generated with this process was stabilized after the 5th ECAP pass. Finally, the micro-strain analyses, in addition to the texture and transmission electron microscopy, contributed to the understanding of the effec t of the physical and mechanical processes that were activated during the SPD-ECAP techniques
CitacióReyes, C., Cabrera, J., Vázquez-Figueroa, V., Alfonso, I., González, G. Texture and lattice distortion study of an Al-6061-T6 alloy produced by ECAP. "Materials transactions", Novembre 2015, vol. 56, núm. 11, p. 1781-1786.
ISSN1345-9678
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
M2015200.pdf | 2,082Mb | Accés restringit |