Show simple item record

dc.contributor.authorÁlvarez Flórez, Jesús Andrés
dc.contributor.authorBuj Corral, Irene
dc.contributor.authorVivancos Calvet, Joan
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Màquines i Motors Tèrmics
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
dc.date.accessioned2016-01-07T13:26:28Z
dc.date.available2016-01-07T13:26:28Z
dc.date.issued2015
dc.identifier.citationAlvarez, J.A., Buj, I., Vivancos, J. Analysis of roughness, force and vibration signals in ball-end milling processes. A: International Research / Expert Conference. "Proceedings of the 19th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2015". Barcelona: 2015, p. 1-4.
dc.identifier.isbn1840-4944
dc.identifier.urihttp://hdl.handle.net/2117/81104
dc.description.abstractIn the present paper, roughness, force and vibration signals from ball-end milling processes are analysed. From the roughness signal actual feed value was obtained as expected. From the force and vibration signals both the frequencies of harmonics corresponding to rotation speed of the tool and impacts of teeth were detected.
dc.format.extent4 p.
dc.language.isoeng
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica::Mecànica::Vibracions mecàniques
dc.subject.lcshMechanics
dc.subject.lcshVibration
dc.subject.otherBall-end milling
dc.subject.otherRoughness
dc.subject.otherForce
dc.subject.otherVibration
dc.subject.otherSignals
dc.titleAnalysis of roughness, force and vibration signals in ball-end milling processes
dc.typeConference report
dc.subject.lemacMecànica
dc.subject.lemacVibració
dc.contributor.groupUniversitat Politècnica de Catalunya. CREMIT - Centre de Recerca de Motors i Instal·lacions Tèrmiques
dc.contributor.groupUniversitat Politècnica de Catalunya. TECNOFAB - Grup de Recerca en Tecnologies de Fabricació
dc.rights.accessOpen Access
local.identifier.drac16968655
dc.description.versionPostprint (published version)
local.citation.authorAlvarez, J.A.; Buj, I.; Vivancos, J.
local.citation.contributorInternational Research / Expert Conference
local.citation.pubplaceBarcelona
local.citation.publicationNameProceedings of the 19th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2015
local.citation.startingPage1
local.citation.endingPage4


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record