Show simple item record

dc.contributor.authorGómez Monterde, Javier
dc.contributor.authorSchulte, M
dc.contributor.authorIlijevic, Stefan
dc.contributor.authorHain, J
dc.contributor.authorArencón Osuna, David
dc.contributor.authorSánchez Soto, Miguel
dc.contributor.authorMaspoch Rulduà, Mª Lluïsa
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica
dc.date.accessioned2015-12-18T15:49:54Z
dc.date.issued2015
dc.identifier.citationJ. Gómez-Monterde, Schulte, M., Ilijevic, S., Hain, J., Arencon, D., Sanchez, M., Maspoch, M. Morphology and mechanical characterization of ABS foamed by microcellular injection moulding. A: Manufacturing Engineering Society International Conference. "Proceedings of the 6th Manufacturing Engineering Society International Conference : Barcelona, July 2015". Barcelona: 2015.
dc.identifier.urihttp://hdl.handle.net/2117/80915
dc.description.abstractIn the present work ABS was used to inject cylindrical test bars, obtaining solid and foamed especimens. By varying the gas content, two levels of weight reduction were achieved. Morphology analysis revealed the presence of solid skin-foamed core structure in foamed samples. SEM micrographs showed a nucleus zone having bigger cells and irregular cell distribution surrounded by a microcellular area with finer cell structure. Foamed bars with 10% and 17% of weight reduction presented similar values of cell size, cell density and solid skin thickness. On the other hand, results provided by simulation software were consistent with the experimental analysis. Mechanical properties were determined throught tensile tests. Tensile strength and elastic modulus gradually decreased with decreasing apparent density. Experimental results were related to relative density and morphology parameters, and prediction models were employed to compare the estimated values to the experimental data.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subject.lcshPolymers--Testing
dc.subject.lcshFoamed materials--Testing
dc.subject.lcshFoam
dc.subject.otherMicrocellular injection moulding
dc.subject.otherMuCell
dc.subject.otherPolymer foam
dc.subject.otherABS
dc.titleMorphology and mechanical characterization of ABS foamed by microcellular injection moulding
dc.typeConference report
dc.subject.lemacEscuma (Química)
dc.subject.lemacPolímers -- Proves
dc.subject.lemacPolímers -- Propietats mecàniques
dc.contributor.groupUniversitat Politècnica de Catalunya. POLY2 - Polyfunctional polymeric materials
dc.rights.accessRestricted access - publisher's policy
drac.iddocument16949524
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
upcommons.citation.authorJ. Gómez-Monterde, Schulte, M., Ilijevic, S., Hain, J., Arencon, D., Sanchez, M., Maspoch, M.
upcommons.citation.contributorManufacturing Engineering Society International Conference
upcommons.citation.pubplaceBarcelona
upcommons.citation.publishedtrue
upcommons.citation.publicationNameProceedings of the 6th Manufacturing Engineering Society International Conference : Barcelona, July 2015


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder