Enviaments recents

  • Design manual for structural stainless steel 

    Afshan, Sheida; Arrayago Luquin, Itsaso; Gardner, Leroy; Gedge, Graham; Jandera, Michal; Real Saladrigas, Esther; Rossi, Barbara; Stranghoner, Natalie; Zhao, Ou (Steel Construction Institute publications, 2017)
    Llibre
    Accés restringit per política de l'editorial
    Stainless steel is used for a wide range of structural applications in aggressive environments where reliable performance over long periods with little maintenance is required. In addition, stainless steel has an attractive ...
  • Manual de diseño para acero inoxidable estructural 

    Afshan, Sheida; Arrayago Luquin, Itsaso; Gardner, Leroy; Gedge, Graham; Jandera, Michal; Real Saladrigas, Esther; Rossi, Barbara; Stranghöner, Natalie; Zhao, Ou (Steel Construction Institute publications, 2017)
    Llibre
    Accés restringit per política de l'editorial
    El acero inoxidable se emplea en un amplio abanico de aplicaciones estructurales en ambientes agresivos en los que se requiere garantizar un comportamiento adecuado durante largos períodos de tiempo con niveles mínimos de ...
  • Precast segmental bridges 

    van der Horst, Aad; Burtet, Pascal; Primault, Didier; Turmo Coderque, José (International Federation for Structural Concrete (fib), 2017)
    Llibre
    Accés restringit per política de l'editorial
    The concept of precast segmental bridges is not new: the first application documented was from the mid-1940s, designed by Eugene Freyssinet and built over the river Marne near Luzancy in France, between 1944 and 1946. ...
  • Guidelines for seismic vulnerability reduction in the urban environment: LESSLOSS report no. 2007/04 

    Oller Martínez, Sergio Horacio; Barbat Barbat, Horia Alejandro; Mata Almonacid, Pablo; Martínez García, Javier (IUSS Press, 2007-07)
    Llibre
    Accés restringit per política de l'editorial
  • Local and global approaches to Friction Stir Welding 

    Dialamishabankareh, Narges; Chiumenti, Michèle; Cervera Ruiz, Miguel; Agelet de Saracibar Bosch, Carlos (International Centre for Numerical Methods in Engineering (CIMNE), 2016)
    Llibre
    Accés obert
    This paper deals with the numerical simulation of Friction Stir Welding (FSW) processes. FSW techniques are used in many industrial applications and particularly in the aeronautic and aerospace industries, where the quality ...
  • Diseño de tanques cilíndricos de ferrocemento para construir en comunidades rurales de países en desarrollo 

    Masó, J; Molins i Borrell, Climent; Aguado de Cea, Antonio (International Centre for Numerical Methods in Engineering (CIMNE), 2005)
    Llibre
    Accés obert
    En este documento se presenta un estudio sobre el diseño y la construcción de depósitos de ferrocemento para países en vías de desarrollo. Se le da un especial énfasis al hecho de que los depósitos que se plantean están ...
  • Soil and groundwater pollution from agricultural activities: learning material 

    Candela Lledó, Lucila; Rao, S; Margiotta, M; Rebouças, A (UNESCO, 1998)
    Llibre
    Accés obert
  • Study of the effect of process parameters on the thermophilic anaerobic digestion of sewage sludge, evaluation of a thermal sludge pre-treatment and overall energetic assessment 

    Ferrer Martí, Ivet (2008)
    Llibre
    Accés obert
    The aim of this PhD Thesis was to study the impact of process parameters on the thermophilic anaerobic digestion of sewage sludge, to evaluate the effect of implementing a low temperature pre-treatment step, and to assess ...
  • Multiscale numerical modelling of microstructured reinforced composites 

    Otero Gruer, Fermín Enrique; Oller Martínez, Sergio Horacio; Martínez García, Javier (International Centre for Numerical Methods in Engineering (CIMNE), 2016)
    Llibre
    Accés obert
    Most of the existing materials around us can be considered composite materials, since they are composed by several phases or components at certain spatial scale. The physical and chemical properties of composites, as occurs ...
  • A river bed hydrokinetic turbine: a laminated composite material rotor design 

    Oller Aramayo, Sergio A.; Nallim, Liz G.; Oller Martínez, Sergio Horacio; Martínez García, Javier (International Centre for Numerical Methods in Engineering (CIMNE), 2017)
    Llibre
    Accés obert
    This chapter presents the composite materials applied to Water Current Turbine (WCT) hydrokinetic turbines. Here will be briefly described the features of these turbines, the fluid-dynamic behavior of the rotor, and its ...
  • Continuum Mechanics for Engineers. Theory and Problems 

    Oliver Olivella, Xavier; Agelet de Saracibar Bosch, Carlos (2017-03)
    Llibre
    Accés obert
    This book was born with the vocation of being a tool for the training of engineers in continuum mechanics. In fact, it is the fruit of the experience in teaching this discipline during many years at the Civil Engineering ...
  • Anatomía computacional: una metodología eficiente basada en imágenes médicas para la generación de modelos 3D 

    Gavidia Bovadilla, Giovana Elizabeth; Martín Landrove, Miguel; Cerrolaza Rivas, Miguel Enrique; Soudah Prieto, Eduardo (Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2011)
    Llibre
    Accés obert
    En bioingeniería ó bioingeniería biomédica, existen áreas de investigación y desarrollo que trabajan en conjunto y se dedican al desarrollo y aplicación de técnicas para extraer con ayuda del ordenador, información clínica, ...

Mostra'n més