Show simple item record

dc.contributor.authorRekik, Hanen
dc.contributor.authorChemingi, Mahmoud
dc.contributor.authorBachaga, Tarek
dc.contributor.authorCherif, Amal
dc.contributor.authorBruna Escuer, Pere
dc.contributor.authorSuñol Martinez, Juan Jose
dc.contributor.authorKhitouni, Mohamed
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Física
dc.date.accessioned2015-11-16T12:05:40Z
dc.date.available2015-11-16T12:05:40Z
dc.date.issued2015-06-05
dc.identifier.citationRekik, H., Chemingi, M., Bachaga, T., Cherif, A., Bruna, P., Suñol, J.J., Khitouni, M. Structure and Mössbauer analysis of melt-spun Fe-Pd ribbons containing Ni and Co. "Metals", 05 Juny 2015, vol. 5, núm. 2, p. 1020-1028.
dc.identifier.issn2075-4701
dc.identifier.urihttp://hdl.handle.net/2117/79304
dc.description.abstractFe68.45Pd28.21Co1.66Ni1.66 alloy in ribbon geometry was produced by melt spinning. The microstructure of the samples was examined using scanning electron microscopy. The structural identification of the as-spun ribbon sample and the annealed ones was performed by means of X-ray diffraction. All the Bragg peaks were indexed based on an fcc type structure of (¿-Fe, Pd) phase with a lattice parameter a = 3.742 (3) Å. This result was proved by Mössbauer technique. The annealed ribbon at 600 °C shows an L1_0 ordered fct structure. An endothermic reaction at T = 358 °C followed by an exothermic one at 390 °C were observed on heating. These reactions were attributed to the Curie temperature of nickel and to the annihilation of an excess of quenched-in vacancies, respectively.
dc.format.extent9 p.
dc.language.isoeng
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subject.lcshMössbauer effect
dc.subject.lcshShape memory alloys
dc.subject.othershape memory alloys
dc.subject.otherstructural
dc.subject.othermicrostructure
dc.subject.otherMössbauer
dc.titleStructure and Mössbauer analysis of melt-spun Fe-Pd ribbons containing Ni and Co
dc.typeArticle
dc.subject.lemacMössbauer, Efecte de
dc.contributor.groupUniversitat Politècnica de Catalunya. GCM - Grup de Caracterització de Materials
dc.identifier.doi10.3390/met5021020
dc.rights.accessOpen Access
drac.iddocument15886011
dc.description.versionPostprint (published version)
dc.relation.projectidinfo:eu-repo/grantAgreement/MINECO/1PE/FIS2014-54734-P
dc.relation.projectidinfo:eu-repo/grantAgreement/AGAUR/2014SGR0058
upcommons.citation.authorRekik, H., Chemingi, M., Bachaga, T., Cherif, A., Bruna, P., Suñol, J.J., Khitouni, M.
upcommons.citation.publishedtrue
upcommons.citation.publicationNameMetals
upcommons.citation.volume5
upcommons.citation.number2
upcommons.citation.startingPage1020
upcommons.citation.endingPage1028


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Except where otherwise noted, content on this work is licensed under a Creative Commons license: Attribution-NonCommercial-NoDerivs 3.0 Spain