Surface finish effect on the anodizing behaviour of Al-Si components obtained by sub-liquidus casting process.
Surface finish effect on the anodizing behaviour.pdf (2,935Mb) (Restricted access) Request copy
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Rights accessRestricted access - publisher's policy
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder
The aim of this study was to investigate the hard decorative anodizing components of A357 aluminium alloy, obtained in semisolid state by Sub Liquidus Casting® process, to improve its tribological properties and corrosion resistance. Components were heat treated in order to modify the shape and distribution of the eutectic silicon phase. The influence of shot peening pre-treatment on anodizing process was evaluated. Surface modifications were investigated as they might have beneficial effects on the wear and corrosion behaviour. Furthermore, the influence of surface condition on the anodization colouring behaviour of aluminium was studied. The microstructure and the surface finish influence on the anodic oxide film growth were studied by optical and scanning electron microscopy. Experiments using a tribometer (ball on disc configuration) were performed in order to evaluate the tribological properties of the material. Salt spray corrosion tests were used to study the corrosion properties before and after the anodizing process.
CitationMenargues, S. [et al.]. Surface finish effect on the anodizing behaviour of Al-Si components obtained by sub-liquidus casting process.. "International journal of material forming", Abril 2010, vol. 3, núm. 1, p. 767-770.
|Surface finish ... he anodizing behaviour.pdf||2,935Mb||Restricted access|