Ir al contenido (pulsa Retorno)

Universitat Politècnica de Catalunya

    • Català
    • Castellano
    • English
    • LoginRegisterLog in (no UPC users)
  • mailContact Us
  • world English 
    • Català
    • Castellano
    • English
  • userLogin   
      LoginRegisterLog in (no UPC users)

UPCommons. Global access to UPC knowledge

Banner header
68.793 UPC E-Prints
You are here:
View Item 
  •   DSpace Home
  • E-prints
  • Grups de recerca
  • ATEM - Anàlisi i Tecnologia d'Estructures i Materials
  • Articles de revista
  • View Item
  •   DSpace Home
  • E-prints
  • Grups de recerca
  • ATEM - Anàlisi i Tecnologia d'Estructures i Materials
  • Articles de revista
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Influencia del contenido de finos en la respuesta estructural a flexión y cortante de vigas de hormigón armado

Thumbnail
View/Open
4413-7572-1-PB.pdf (3,853Mb)
 
10.3989/ic.14.039
 
  View UPCommons Usage Statistics
  LA Referencia / Recolecta stats
Includes usage data since 2022
Cita com:
hdl:2117/77096

Show full item record
Santos Ferreira, Denise CarinaMés informacióMés informació
Oller Ibars, EvaMés informacióMés informacióMés informació
Bairán García, Jesús MiguelMés informacióMés informacióMés informació
Marí Bernat, Antonio RicardoMés informacióMés informacióMés informació
Carrascon, Sergio
Document typeArticle
Defense date2015
PublisherConsejo Superior de Investigaciones Científicas (CSIC)
Rights accessOpen Access
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder
Abstract
Este artículo presenta un estudio experimental sobre el comportamiento a flexión y cortante de vigas de hormigón armado con un contenido de finos (275 kg/m3) superior al límite permitido por la Instrucción EHE-08 (175 kg/m3). En el rango estudiado, el contenido de finos apenas afectó a la respuesta a flexión. La resistencia a cortante de vigas con alto contenido de finos fue menor que la de las vigas de hormigón convencional, en especial para las vigas con cuantía alta de armadura longitudinal y con armadura de cortante, con una reducción de hasta el 23 % en la carga última. Esta reducción se considera debida a la disminución de propiedades mecánicas del hormigón que afecta especialmente al cortante resistido por fricción en la fisura. Por último, los ensayos realizados han permitido verificar un modelo numérico de análisis no lineal evolutivo para predecir el comportamiento de estructuras de hormigón con distintos contenidos de finos.
 
This paper presents an experimental study on the flexural and shear behavior of reinforced concrete beams with a fines content (275 kg/m3) higher than the limit value allowed by the Spanish Concrete Code EHE-08 (175 kg/m3). In the studied range, the fines content scarcely affected the flexural response. The shear strength of the beams with a high content of fines was lower than that of the beams cast with conventional concrete, especially for those with a high longitudinal internal reinforcement ratio and with transversal stirrups, where the reduction of the ultimate load was up to 23 %. Such a reduction is considered due to the reduction of mechanical properties of concrete and that of the aggregate interlock along the crack length. Finally, the experimental results have allowed verifying a numerical model for the non-linear analysis of RC members to accurately predict the influence of the amount of fine aggregate on the structural response.
CitationFerreira, D., Oller, E., Bairan, J., Mari, A., Carrascon, S. Influencia del contenido de finos en la respuesta estructural a flexión y cortante de vigas de hormigón armado. "Informes de la construcción.", 2015, vol. 67, núm. 539, p. e97-1-e97-12. 
URIhttp://hdl.handle.net/2117/77096
DOI10.3989/ic.14.039
ISSN1988-3234
Publisher versionhttp://informesdelaconstruccion.revistas.csic.es/index.php/informesdelaconstruccion/article/view/4413/5091
Collections
  • ATEM - Anàlisi i Tecnologia d'Estructures i Materials - Articles de revista [405]
  • Departament d'Enginyeria de la Construcció (fins octubre 2015) - Articles de revista [211]
  • TE - Tecnologia d'Estructures - Articles de revista [111]
  View UPCommons Usage Statistics

Show full item record

FilesDescriptionSizeFormatView
4413-7572-1-PB.pdf3,853MbPDFView/Open

Browse

This CollectionBy Issue DateAuthorsOther contributionsTitlesSubjectsThis repositoryCommunities & CollectionsBy Issue DateAuthorsOther contributionsTitlesSubjects

© UPC Obrir en finestra nova . Servei de Biblioteques, Publicacions i Arxius

info.biblioteques@upc.edu

  • About This Repository
  • Metadata under:Metadata under CC0
  • Contact Us
  • Send Feedback
  • Privacy Settings
  • Inici de la pàgina