Hot working analysis of a CuZn40Pb2 brass on the monophasic (beta) and intercritical (alpha plus beta) regions
View/Open
Cita com:
hdl:2117/76728
Document typeArticle
Defense date2015-03-11
Rights accessOpen Access
Abstract
The high temperature deformation behavior of a Cu4OZn2Pb brass was studied by means of compression and tensile tests in the beta monophasic and alpha/beta biphasic regions. The ductility evaluated in terms of elongation and area reduction allowed to distinguish three regions: one 13 monophasic region (above 720 degrees C), and two alpha/beta biphasic regions, between 720 degrees C and 600 degrees C, and below 600 degrees C. The fracture appearance was evolving from a ductile type, with dimple formation, to a more brittle one with grain decohesion as the deformation temperature was decreased or the amount of 13 phase reduced.; The
CitationSuarez, L., Rodriguez-Calvillo, P., Cabrera, J., Martinez, A., Majuelos, D. Hot working analysis of a CuZn40Pb2 brass on the monophasic (beta) and intercritical (alpha plus beta) regions. "Materials science and engineering A. Structural materials properties microstructure and processing", 11 Març 2015, p. 42-50.
ISSN0921-5093
Files | Description | Size | Format | View |
---|---|---|---|---|
Markedup_Manuscript.docx | manuscrito final aceptado | 4,064Mb | Microsoft Word 2007 | View/Open |
Except where otherwise noted, content on this work
is licensed under a Creative Commons license
:
Attribution-NonCommercial-NoDerivs 3.0 Spain