Design of an analog quasi-steady-state nonlinear current-mode controller for single-phase active power filter
dc.contributor.author | Miret Tomàs, Jaume |
dc.contributor.author | García de Vicuña Muñoz de la Nava, José Luis |
dc.contributor.author | Castilla Fernández, Miguel |
dc.contributor.author | Matas Alcalá, José |
dc.contributor.author | Guerrero Zapata, Josep Maria |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria de Sistemes, Automàtica i Informàtica Industrial |
dc.date.accessioned | 2010-06-02T07:48:21Z |
dc.date.available | 2010-06-02T07:48:21Z |
dc.date.created | 2009-12 |
dc.date.issued | 2009-12 |
dc.identifier.citation | Miret, J. [et al.]. Design of an analog quasi-steady-state nonlinear current-mode controller for single-phase active power filter. "IEEE transactions on industrial electronics", Desembre 2009, vol. 56, núm. 12, p. 4872-4881. |
dc.identifier.issn | 0278-0046 |
dc.identifier.uri | http://hdl.handle.net/2117/7477 |
dc.description.abstract | The injection of sinusoidal current to an electrical grid is nowadays possible with the use of active power filters (APFs).With quasi-steady-state (QSS) nonlinear controllers, these power filters provide low grid-current-harmonic content with simple-control analog implementation. This paper focuses on the design of a QSS nonlinear controller for a single-phase APF. A complete analysis based on the sliding-mode-control theory is given. From the analysis, a set of control-design guidelines is presented to select the gains and parameters of the control scheme. Selected experimental results are reported to validate the theoretical design procedure. |
dc.format.extent | 10 p. |
dc.language.iso | eng |
dc.subject | Àrees temàtiques de la UPC::Energies::Energia elèctrica::Automatització i control de l'energia elèctrica |
dc.subject | Àrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència |
dc.subject.lcsh | Electric power systems--Control |
dc.title | Design of an analog quasi-steady-state nonlinear current-mode controller for single-phase active power filter |
dc.type | Article |
dc.subject.lemac | Sistemes elèctrics de potència |
dc.subject.lemac | Reguladors elèctrics |
dc.contributor.group | Universitat Politècnica de Catalunya. SEPIC - Sistemes Electrònics de Potència i de Control |
dc.identifier.doi | 10.1109/TIE.2009.2026385 |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Open Access |
local.identifier.drac | 2044851 |
dc.description.version | Postprint (published version) |
local.citation.author | Miret, J.; Garcia De Vicuña, J.; Castilla, M.; Matas, J.; Guerrero, J. |
local.citation.publicationName | IEEE transactions on industrial electronics |
local.citation.volume | 56 |
local.citation.number | 12 |
local.citation.startingPage | 4872 |
local.citation.endingPage | 4881 |
Files in this item
This item appears in the following Collection(s)
-
Articles de revista [1.010]
-
Articles de revista [1.350]
-
Articles de revista [87]
All rights reserved. This work is protected by the corresponding intellectual and industrial
property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public
communication or transformation of this work are prohibited without permission of the copyright holder