Comparison of IUP 16 and Microscopic Hot Table Methods for Shrinkage Temperature Determination
jsltc_94_2.pdf (6,138Mb) (Restricted access) Request copy
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Rights accessRestricted access - publisher's policy
In the leather industry, shrinkage temperature (Ts) is determined by the IUP 16 method. However, only microanalytical techniques like the Microscopic Hot Table (MHT) method are appropriate for the Ts of leather objects of historial value. No more than 0.1-0.4mg of sample is needed for the test. The precision and accuracy of the MHT method were investigated taking the official IUP 16 method as a reference. It was concluded that the Ts determined by both methods are in good agreement. The MHT method is precise and sensitive enough to state that small changes of 1.3ºC detected in Ts are statistically significant. The method was successfully applied to determine the Ts of several artefacts of the Leather Museum of Igualada.
CitationFont, J. [et al.]. Comparison of IUP 16 and Microscopic Hot Table Methods for Shrinkage Temperature Determination. "Journal of the Society of Leather Technologists and Chemists", 15 Abril 2010, vol. 94, núm. 2, p. 59-64.
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder