Ponències/Comunicacions de congressos
Recent Submissions
-
Improving the development of engineering projects through informational competence and the introduction of social web tools
(Aalborg University Press, 2015)
Conference report
Open AccessThis paper describes the improvement plan conducted in the “Engineering Projects” course, aimed at increasing the quality of academic work in the preparation, writing and structuring of the course final documents. The ... -
Abordando la evaluación ambiental estratégica de la transición de México hacia las energías renovables
(2014)
Conference report
Open AccessLa transición hacia sociedades ambientalmente sustentables implica un cambio estratégico importante en el campo de los procesos de planificación (Ahumada, Espejel, & Arámburo, 2011). La Evaluación Ambiental Estratégica ... -
Kinetic study of the indirect electro-oxidation of azo reactive dyes
(2015)
Conference report
Restricted access - author's decisionIn this work, an electrochemical treatment in a batch cell with Ti/Pt anode was applied to degrade two reactive dyes (Color Index Reactive Orange 4 and 13) in the presence of chloride ions, usually used as dyeing ... -
Electrochemical techniques combined with UV irradiation for the treatment and reuse of textile dyeing wastewater
(2015)
Conference lecture
Restricted access - publisher's policy -
Valorisation of Moringaoleifera waste: treatment and reuse of textile dye effluents
(2015)
Conference lecture
Restricted access - publisher's policyThis work is focused on the valorisation of an agricultural waste as natural coagulant to treat wastewater from the textile industry. In this paper, the waste of Moringaoleifera oil extraction is used as coagulant to remove ... -
La Experiencia del equipo ETSEIB-ELISAVA en la Barcelona Smart Moto Challenge: Un proyecto Learning-by-doing de diseño e ingeniería
(Congrés Internacional de Docència Universitària i Innovació (CIDUI), 2014)
Conference lecture
Restricted access - publisher's policySe describe una experiencia docente pionera basada en el clásico concepto“learning-by-doing”, en la que diseño e ingeniería se unen para obtener un producto de mercado. En concreto, se describen los retos planteados así ... -
Retrieval of boundary layer height from lidar using extended Kalman filter approach, classic methods, and backtrajectory cluster analysis
(International Society for Photo-Optical Instrumentation Engineers (SPIE), 2014)
Conference report
Restricted access - publisher's policyThis contribution evaluates an approach using an extended Kalman filter (EKF) to estimate the planetary boundary layer height (PBLH) from lidar measurements obtained in the framework of the European Aerosol Research LIdar ... -
Inter-comparison of lidar methods for obtaining planetary boundary-layer height from a July 2012 monitoring campaign over the Iberian Peninsula in the framework of EARLINET
(2013)
Conference lecture
Open AccessThe depth of the planetary boundary-layer (PBL) is defined as the height of the inversion level separating the free troposphere (FT) from the boundary-layer (Stull, 1988). Reliable representation of PBL height is important ... -
Work in progress-role of learning strategies in electrical circuits and analog electronics courses
(Institute of Electrical and Electronics Engineers (IEEE), 2014)
Conference lecture
Restricted access - publisher's policyThis work-in-progress describes a study intended to determine whether self-regulated learning strategies influence the academic performance of students from the Department of Electrical and Electronics Engineering at ... -
Criterios para prácticas de evaluación de calidad. Una propuesta de GRAPA-RIMA
(Octaedro, 2012)
Conference report
Open AccessEl grupo de innovación GRAPA (GRupo de la Evaluación de la Práctica Académica) del proyecto RIMA de la Universitat Politècnica de Catalunya ha elaborado una serie de criterios, en forma de rúbrica, como buenas prácticas ... -
Multi-criteria decision making with linguistic labels: a comparison of two methodologies applied to energy planning
(2014)
Conference report
Open AccessThis paper compares two multi-criteria decision making (MCDM) approaches based on linguistic label assessment. The first approach consists of a modified fuzzy TOPSIS methodology introduced by Kaya and Kahraman in 2011. ... -
A BIM model to visualize quality risks in construction projects
(CRC Press Taylor & Francis Group, 2014)
Conference report
Restricted access - publisher's policyDefects are a non-value adding activity seriously affecting the performance and productivity in construction projects that spend unnecessary cost, time materials and manpower. Non-quality represent the 4% of the contract ...
RSS 1.0