Show simple item record

dc.contributor.authorGonzález Vidal, Nathalie
dc.contributor.authorMartínez de Ilarduya Sáez de Asteasu, Domingo Antxon
dc.contributor.authorMuñoz Guerra, Sebastián
dc.contributor.authorCastell, Pere
dc.contributor.authorMartínez, Maria Teresa
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Química
dc.date.accessioned2010-03-22T11:37:17Z
dc.date.available2010-03-22T11:37:17Z
dc.date.created2010-05-01
dc.date.issued2010-05-01
dc.identifier.citationGonzález, N. [et al.]. Synthesis and properties of poly(hexamethylene terephthalate)/multiwall carbon nanotubes nanocomposites. "Composites science and technology", 01 Maig 2010, vol. 70, núm. 5, p. 789-796.
dc.identifier.issn0266-3538
dc.identifier.urihttp://hdl.handle.net/2117/6741
dc.description.abstractPoly(hexamethylene terephthalate) (PHT)/carbon nanotubes (CNT) nanocomposites containing 1% and 3% (w/w) of filler were prepared by two procedures: in situ ring-opening polymerization of hexamethylene terephthalate cyclic oligomers in the presence of CNT and melt blending of PHT/CNT mixtures. Arc discharge multiwalled carbon nanotubes, both pristine (MWCNT) and hydroxyl functionalized (MWCNT-OH), were used. The objective was to evaluate the effect of preparation procedure, nanotube sidewall functionalization and amount of nanotube loaded on properties of PHT. All nanocomposites showed an efficient distribution of the carbon nanotubes within the PHT matrix but interfacial adhesion and reinforcement effect was dependent on both functionalization and nanotubes loading. Significant differences in thermal stability and mechanical properties ascribable to functionalization and processing were observed among the prepared nanocomposites. All the prepared nanocomposites showed enhanced crystallizability due to CNT nucleating effects although changes in melting and glass transition temperatures were not significant.
dc.format.extent8 p.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials::Materials plàstics i polímers
dc.subject.lcshNanocomposites -- chemistry
dc.titleSynthesis and properties of poly(hexamethylene terephthalate)/multiwall carbon nanotubes nanocomposites
dc.typeArticle
dc.subject.lemacNanocompòsits (Materials)
dc.contributor.groupUniversitat Politècnica de Catalunya. POL - Polímers Industrials Avançats i Biopolímers Tecnològics
dc.identifier.doi10.1016/j.compscitech.2010.01.014
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://www.sciencedirect.com/science/journal/02663538
dc.rights.accessOpen Access
drac.iddocument2194402
dc.description.versionPostprint (author’s final draft)
upcommons.citation.authorGonzález, N.; Martinez de Ilarduya, A.; Muñoz, S.; Castell, P.; Martínez, M.
upcommons.citation.publishedtrue
upcommons.citation.publicationNameComposites science and technology
upcommons.citation.volume70
upcommons.citation.number5
upcommons.citation.startingPage789
upcommons.citation.endingPage796


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder