Mostra el registre d'ítem simple
Heat Transfer of Mineral-Filled Polypropylene Foams
dc.contributor.author | Antunes, Marcelo de Sousa Pais |
dc.contributor.author | Redondo Realinho, Vera Cristina de |
dc.contributor.author | Martínez Benasat, Antonio |
dc.contributor.author | Solórzano Quijano, Eusebio |
dc.contributor.author | Rodríguez-Pérez, Miguel Ángel |
dc.contributor.author | Velasco Perero, José Ignacio |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica |
dc.date.accessioned | 2010-03-16T14:51:56Z |
dc.date.available | 2010-03-16T14:51:56Z |
dc.date.created | 2010 |
dc.date.issued | 2010 |
dc.identifier.citation | De Sousa Pais, M. [et al.]. Heat Transfer of Mineral-Filled Polypropylene Foams. "Defect and diffusion forum", 2010, vol. 297-301, p. 990-995. |
dc.identifier.issn | 1012-0386 |
dc.identifier.uri | http://hdl.handle.net/2117/6659 |
dc.description.abstract | The thermal conductivity of unfilled polypropylene foams produced using different foaming processes has previously been demonstrated to be mainly affected by the foam’s bulk density [1]. The influence of adding inorganic particles is now studied, with the thermal conductivity of the mineral-filled PP foams being determined using the Transient Plane Source Method (TPS). To this end, two different fillers were used. The incorporation of high amounts (50 and 70 wt.%) of magnesium hydroxide resulted in considerably higher thermally conductive foamed materials, with interesting thermal anisotropies being observed for the higher expansion ratio foams. On the contrary, adding montmorillonite (MMT) nanoparticles did not considerably alter the thermal conductivity of the foams, their value being mainly affected by the relative density. |
dc.format.extent | 6 p. |
dc.language.iso | eng |
dc.publisher | Trans Tech Publications |
dc.subject | Àrees temàtiques de la UPC::Enginyeria dels materials::Materials plàstics i polímers |
dc.subject.lcsh | Thermal conductivity |
dc.subject.lcsh | Polypropylene |
dc.subject.lcsh | Foam |
dc.subject.lcsh | Montmorillonite |
dc.title | Heat Transfer of Mineral-Filled Polypropylene Foams |
dc.type | Article |
dc.subject.lemac | Polipropilè |
dc.subject.lemac | Propietats tèrmiques |
dc.contributor.group | Universitat Politècnica de Catalunya. POLYCOM - Polimers i compòsits: tecnologia |
dc.identifier.doi | 10.4028/www.scientific.net/DDF.297-301.990 |
dc.description.peerreviewed | Peer Reviewed |
dc.rights.access | Restricted access - publisher's policy |
local.identifier.drac | 2189717 |
dc.description.version | Postprint (published version) |
local.citation.author | De Sousa Pais, M.; De Redondo, V.; Martinez, A.; Solórzano, E.; Rodríguez-Pérez, M.; Velasco J.I. |
local.citation.publicationName | Defect and diffusion forum |
local.citation.volume | 297-301 |
local.citation.startingPage | 990 |
local.citation.endingPage | 995 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
Articles de revista [960]
-
Articles de revista [96]