Articles de revista
Recent Submissions
-
Debye frequency-extended waveguide permittivity extraction for high complex permittivity materials. Concrete setting process characterization
(2019-12)
Article
Open AccessA waveguide with central frequency 868 MHz is used in transmission/reflection operation regime to accurately measure the behaviour of the complex permittivity of high complex permittivity granular materials and it has been ... -
Resonance-Based microwave technique for body implant sensing
(Multidisciplinary Digital Publishing Institute (MDPI), 2019-11-03)
Article
Open AccessThere is an increasing need for safe and simple techniques for sensing devices and prostheses implanted inside the human body. Microwave wireless inspection may be an appropriate technique for it. The implanted device may ... -
Design and evaluation of an antenna applicator for a microwave colonoscopy system
(2019-08-01)
Article
Open AccessThis paper presents a design of a compact antenna applicator for a microwave colonoscopy system. Although colonoscopy is the most effective method for colorectal cancer detection, it suffers from important visualization ... -
A dynamic load balancing method for the evaluation of chemical reaction rates in parallel combustion simulations
(Elsevier, 2019-08-15)
Article
Restricted access - publisher's policyThe development and assessment of an efficient parallelization method for the evaluation of reaction rates in combustion simulations is presented. Combustion simulations where the finite-rate chemistry model is employed ... -
3-D printed UWB microwave bodyscope for biomedical measurements
(2019-02-15)
Article
Open AccessIn this letter, a three-dimensional (3-D) printed compact ultrawideband (UWB) extended gap ridge horn (EGRH) antenna designed to be used for biological measurements of the human body is described. The operational frequency ... -
La formación en ingeniería para la sociedad de la información.
(2018-12-18)
Article
Open AccessCharles Darwin, en su libro "El Origen de las Especies", sentenció: No es el animal más fuerte, ni el más inteligente, el que sobrevive, sino aquel que es capaz de adaptarse a los canvios del entorno. Propiciado por ... -
Collimated beam FMCW radar for vital sign patient monitoring
(2018-12-18)
Article
Open AccessPatient monitoring of vital signals such as breathing rhythm and heart beat rate can be done remotely by the use of a radar system. This approach is advantageous since it does not require any contact with the patient. ... -
Versatile and accurate schemes of discretization for the electromagnetic scattering analysis of arbitrarily shaped piecewise homogeneous objects
(2018-12-01)
Article
Restricted access - publisher's policyThe discretization by the method of moments (MoM) of integral equations in the electromagnetic scattering analysis most often relies on divergence-conforming basis functions, such as the Rao–Wilton–Glisson (RWG) set, which ... -
A microwave invisibility cloak: the design, simulation, and measurement of a simple and effective frequency-selective surface-based mantle cloak
(2018-06-26)
Article
Open AccessIn recent years, there has been a growing interest in developing invisibility cloaks that can conceal an object. These techniques are often based either on coating a dielectric or conducting object with a homogeneous ... -
Comparative efficiency and power assessment of optical photoconductive material-based terahertz sources for wireless communication systems
(2019-01-01)
Article
Open AccessTerahertz band has recently attracted the attention of the communication society due to its huge bandwidth and very high-speed wireless communications capability. It has been utilized in a variety of disciplines including ... -
A compact dual-band planar monopole antenna using fractal rings and A Y-shaped feeding transmission line
(De Gruytr, 2018-01-01)
Article
Open AccessThis paper presents a novel design approach of a compact dual-band monopole antenna with an overall size of 18.9x13x1.6mm3. The proposed antenna is composed of a fractal ring shaped patch fed by a Y-shaped transmission ... -
Assessment of 3-D printing technologies for millimeter-wave reflectors
(Institute of Electrical and Electronics Engineers (IEEE), 2018-07-20)
Article
Open AccessThree different 3D printing technologies: Stereolithography (SLA), Fused Deposition Modeling (FDM) and HP Multi Jet Fusion Technology (MJF) are compared to build a parabolic reflector operating at 100 GHz. Fabrication ...
RSS 1.0