Show simple item record

dc.contributor.authorBiel Solé, Domingo
dc.contributor.authorFossas Colet, Enric
dc.contributor.authorGuinjoan Gispert, Francisco
dc.contributor.authorAlarcón Cot, Eduardo José
dc.contributor.authorPoveda López, Alberto
dc.contributor.otherUniversitat Politècnica de Catalunya. Institut d'Organització i Control de Sistemes Industrials
dc.date.accessioned2009-10-29T11:28:33Z
dc.date.available2009-10-29T11:28:33Z
dc.date.created2001-06
dc.date.issued2001-06
dc.identifier.citationBiel, D.; Fossas, E.; Guinjoan, F.; Alarcón, E.; Poveda, A. "Application of Sliding Mode Control to the design of a Buck-based sinusoidal Generator". IEEE Transactions on Industrial Electronics, 2001, Vol. 48, No. 3, p. 563-571.
dc.identifier.issn0278-0046
dc.identifier.urihttp://hdl.handle.net/2117/6044
dc.description.abstractThis paper is devoted to the design of a sliding-mode control scheme for a buck-based inverter, with programmable amplitude, frequency, and dc offset, with no external sinusoidal reference required. A general procedure for obtaining an autonomous (time independent) switching surface from a time-dependent one is presented. For this surface, the system exhibits a zeroth-order dynamics in sliding motion. On the other hand, from the sliding-domain analysis, a set of design restrictions is established in terms of the inverter output filter Bode diagram and the output signal parameters (amplitude, frequency and dc offset), facilitating the subsequent design procedure. The control scheme is robust with respect to both power-stage parameter variations and external disturbances and can be implemented by means of conventional electronic circuitry. Simulations and experimental results for both reactive and nonlinear loads are presented.
dc.format.extent9 p.
dc.language.isoeng
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.subjectÀrees temàtiques de la UPC::Informàtica::Automàtica i control
dc.subject.lcshControl theory
dc.subject.otherSinusoidal generation
dc.subject.otherSliding-mode control
dc.subject.otherSwitching converters
dc.subject.otherGeneración sinusoidal
dc.subject.otherGeneració sinusoïdal
dc.subject.otherControl en modo deslizante
dc.subject.otherControl en mode lliscant
dc.subject.otherConvertidores conmutados
dc.subject.otherConvertidors commutats
dc.titleApplication of Sliding Mode Control to the design of a Buck-based sinusoidal Generator
dc.typeArticle
dc.subject.lemacControl, Teoria de
dc.subject.lemacConvertidors commutats
dc.contributor.groupUniversitat Politècnica de Catalunya. ACES - Control Avançat de Sistemes d'Energia
dc.description.peerreviewedPeer Reviewed
dc.subject.inspecClassificació INSPEC::Convertors::Power convertors::Switching convertors
dc.relation.publisherversionhttp://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=925583
dc.rights.accessOpen Access
local.personalitzacitaciotrue


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder