Articles de revista
Recent Submissions
-
Global length and overhang control for level set and density approaches via perimeter minimization
(John Wiley & sons, 2025-01-20)
Article
Restricted access - publisher's policyTopology optimization is probably one of the most efficient techniques for structural design. However, running topology optimization without geometry control provides complex designs, which often are manufactured with ... -
First steps on key concepts related to autonomous shipping within maritime education and training framework
(Universidad de Cantabria, 2024-08-16)
Article
Open AccessAdvancements in telecommunications, computing, and sensors are driving ships towards greater autonomy each day. New projects aimed at achieving fully autonomous transport are already shaping the fleets of the future, ... -
Results analysis of surveys made to stakeholders in the Pacific ports in the Panama canal: A study foused to imporve the efficiency of loading/discharging operations
(2024-12-02)
Article
Open AccessThis research aims to analyze the communication process between the different participating actors in the port of Balboa, in the Panamanian Pacific. The starting hypothesis begins with the normal operation of the port ... -
A three-dimensional viscoelastic–viscoplastic and viscodamage constitutive model for unidirectional fibre-reinforced polymer laminates
(Elsevier, 2024-06-04)
Article
Open AccessA novel 3D viscoelastic–viscoplastic and viscodamage constitutive model is proposed to predict the viscous effects due to dynamic loading conditions of unidirectional carbon fibre-reinforced polymer laminates at the ... -
Definition of a beam-like reduced order model element by means of a mixed dimensional coupling
(Elsevier, 2024-10-01)
Article
Restricted access - publisher's policyThe use of Reduced Dimensional Models (RDM) discretized like beams, plates and shell elements drastically decreases the computational cost of solving a full 3D elastic problem with a Finite Element Method (FEM). However, ... -
OC6 Phase I: Investigating the underprediction of low-frequency hydrodynamic loads and responses of a floating wind turbine
(Institute of Physics (IOP), 2020-09)
Article
Open AccessPhase I of the OC6 project is focused on examining why offshore wind design tools underpredict the response (loads/motion) of the OC5-DeepCwind semisubmersible at its surge and pitch natural frequencies. Previous investigations ... -
Analysis of structural second order effects on a floating concrete platform for FOWT's
(Elsevier, 2016-09)
Article
Open AccessThe irruption of the floating wind energy in the offshore engineering is changing the paradigm of the structural analysis for those new structures, which are significantly smaller and more slender than those previously ... -
Experimental modelling of a novel concrete-based 15-MW spar wind turbine
(Elsevier, 2024-10)
Article
Open AccessPhysical model testing is a crucial step in the validation process of floating offshore wind concepts that can be used to contribute to the worldwide decarbonization objectives. It is also important to understand the coupled ... -
OC6 project Phase IV: validation of numerical models for novel floating offshore wind support structures
(Copernicus Office, 2024-04)
Article
Open AccessThis paper provides a summary of the work done within Phase IV of the Offshore Code Comparison Collaboration, Continued with Correlation and unCertainty (OC6) project, under International Energy Agency Wind Technology ... -
Damage detection in a fiber reinforced polymers based tower of a floating offshore wind and tidal power platform using structural dynamic parameters
(2022)
Article
Open AccessThe development of offshore renewable energy structures is growing at a fast pace, and their maintenance will become critical in further years. Because steel corrosion on offshore structures is one of their highest maintenance ... -
Composite materials, technologies and manufacturing: current scenario of European Union shipyards
(2024-06)
Article
Open AccessThis paper provides the results and the analysis of a study conducted on the processes and technologies currently used by European Union shipyards, and their potential interest in new advanced composite construction ... -
FIBRE4YARDS: Fibre composite manufacturing technologies for the automation and modular construction in shipyards
(2022)
Article
Open AccessFIBRE4YARDS project aims to improve the competitiveness of small and medium European shipyards working with Fibre Reinforced Polymers (FRP). To this extent, the project expects to bring new automated cost-efficient production ...