Enviaments recents

  • Coatings and inks for food packaging including nanomaterials 

    Bautista, Lorenzo; Molina, Laura; Niembro, Sandra; García Torres, José Manuel; López López, José; Vílchez, Alejandro (Elsevier, 2017)
    Capítol de llibre
    Accés restringit per política de l'editorial
  • Atmospheric pressure plasmas: polymerization 

    García Torres, José Manuel (2016-12-13)
    Capítol de llibre
    Accés restringit per política de l'editorial
    Atmospheric pressure plasma polymerization (APPP) has been revealed as a real alternative to other lowpressure methods for the deposition of a wide range of polymer materials and with industrial applicability. The influence ...
  • Thermal, electrical, insulation and fire resistance properties of polysaccharide and protein-based aerogels 

    Sánchez Soto, Miguel; Whang, Liang; Abt, Tobias Martin; De la Cruz Jesús, Lucia Guadalupe; Schiraldi, David A. (Royal Society of Chemistry (RSC), 2018-08-29)
    Capítol de llibre
    Accés restringit per política de l'editorial
    Some of the main properties of polysaccharide and protein-based aerogels are discussed in this chapter. The fundamentals of thermal conductivity governing the insulation properties of these materials are presented and ...
  • Using vegetable fiber nonwovens cement composites as sustainable materials for applications on ventilated fac¸ade systems 

    Claramunt Blanes, Josep; Ardanuy Raso, Mònica (2017-06-30)
    Capítol de llibre
    Accés restringit per política de l'editorial
  • Surface functionalization of biomaterials for bone tissue regeneration and repair 

    Mas Moruno, Carlos (2018)
    Capítol de llibre
    Accés restringit per política de l'editorial
    Biomaterials have evolved from mere bioinert substrates, required only to passively support cell adhesion and growth, to bioactive cell-instructive surfaces with the capacity to tune cell behavior and dictate cell ...
  • PLA-OMMT Nanocomposites manufactured by reactive extrusion 

    Carrasco Alonso, Félix Ángel; Santana Pérez, Orlando Onofre; Cailloux, Jonathan; Maspoch Rulduà, M. Lluïsa (IAPC Publishing, 2017-05-03)
    Capítol de llibre
    Accés obert
  • Dental Implants: Plasma polymerization for antibacterial coatings 

    Buxadera Palomero, Judit; Canal Barnils, Cristina; Gil Mur, Francisco Javier; Rodríguez Rius, Daniel (CRC Press, 2016)
    Capítol de llibre
    Accés restringit per política de l'editorial
    Dental implants are widely used to overcome tooth loss. The material of choice for this application is titanium, due to its excellent mechanical properties, high corrosion resistance, and high biocompatibility. Despite the ...
  • Evaluation of the bulk and alpha-case layer properties in Ti-6Al-4V at micro- and nano-metric length scale 

    Sefer, Birhan; Roa Rovira, Joan Josep; Mateo García, Antonio Manuel; Pederson, Robert; Antti, Marta-Lena (WILEY, 2016)
    Capítol de llibre
    Accés restringit per política de l'editorial
    In the present study the hardness of individual alpha ( )-Ti grains in Ti-6Al-4V was measured by nanoindentation using Berkovich tip indenter. Additionally, alpha-case layer was induced by performing isothermal heat ...
  • PLA-based foams: tissue engineering 

    Velasco Perero, José Ignacio; Antunes, Marcelo de Sousa Pais (2015-04-02)
    Capítol de llibre
    Accés restringit per política de l'editorial
    Biodegradable porous scaffolds with or without bioactive molecules prepared by clean techniques attract an enormous interest for tissue engineering applications. Scaffolds work as structural support for both cell ...
  • Polyimides 

    Abbasi, Hooman; Antunes, Marcelo de Sousa Pais; Velasco Perero, José Ignacio (2015-12-22)
    Capítol de llibre
    Accés restringit per política de l'editorial
  • Nanoindentation of advanced ceramics. applications to ZrO2 materials 

    Roa Rovira, Joan Josep; Jiménez Piqué, Emilio; Anglada Gomila, Marcos Juan (John Willey & Sons, 2015)
    Capítol de llibre
    Accés restringit per política de l'editorial
    This chapter describes commonly used methods of analyzing and interpreting hardness, elastic modulus and indentation stress-strain curve for bulk and coating ceramics. Examples of different materials, but specially zirconia ...
  • Protecció de la innovació tecnològica 

    Albiol Rodríguez, Jordi; Cusidó Roura, Jordi (Generalitat de Catalunya. CIDEM, 2009-09)
    Capítol de llibre
    Accés obert

Mostra'n més