Departament de Ciència dels Materials i Enginyeria Metal·lúrgica

Recent Submissions

  • El juego de rol como metodología activa (o cómo hacer mucho con muy poco) 

    Salán Ballesteros, Maria Núria; Rupérez de Gracia, Elisa; Llumà Fuentes, Jordi; Jorba Peiró, Jordi; Rodríguez Rius, Daniel; Torres Hernández, Yadir (Sociedad Española de Materiales, 2017)
    Article
    Open Access
    Covenantee:   Universidad de Sevilla
    Este trabajo, diseñado desde el Grupo de Innovación Docente en Materiales (GIDMat-RIMA), plantea una experiencia de innovación docente en la que el peso del proceso de aprendizaje recae, mayoritariamente, en el estudiantado, ...

  • Influence of the elastic modulus on the osseointegration of dental implants 

    Brizuela Velasco, Aritza; Herrero Climent, Mariano; Ríos Carrasco, Elisa; Rios Santos, Jose Vicente; Pérez Antoñanzas, Román; Manero Planella, José María; Gil Mur, Francisco Javier (Multidisciplinary Digital Publishing Institute (MDPI), 2019-01-01)
    Article
    Open Access
    Covenantee:   Universidad de Oviedo / Universidad de Sevilla / Universitat Internacional de Catalunya
    The load transfer from metallic prosthesis to tissue plays an important role in the success of a designed device. From a mechanical behavior point of view, the load transfer will be favored when the elastic modulus between ...

  • Estudio sobre la creatividad relacionada con la habilidad de programadores universitarios 

    Islas Torres, Claudia; Carranza Alcántar, Maria del Rocío; Pérez Poch, Antoni; Salán Ballesteros, Maria Núria (2018)
    Article
    Open Access
    Actualmente la habilidad de programar es una de las capacidades que desarrollan o en su caso potencializan los estudiantes de ingeniería en computación, algunos estudios en la literatura parten de la premisa de que dicha ...

  • Cooperative learning and embedded active learning methodologies for improving students’ motivation and academic results 

    Pérez Poch, Antoni; Sánchez Carracedo, Fermín; Salán Ballesteros, Maria Núria; López Álvarez, David (Tempus Publications, 2019)
    Article
    Open Access
    In recent years, a number of teaching strategies have been applied in higher education to improve students’ academic results and motivation, with a focus on active methodologies. These techniques highlight the student ...

  • Notch effect on the fracture of a polymeric film 

    León, Noel; Martínez Benasat, Antonio; Castejón, P.; Arencón Osuna, David (2018-06-01)
    Article
    Open Access
    The fracture behavior of a bio-based thermoplastic copolyester film has been studied by combining the essential work of fracture, the J-integral, and the crack tip opening displacement characterization methods on double ...

  • Multivariate identification of extruded PLA samples from the infrared spectrum 

    Riba Ruiz, Jordi-Roger; Cantero, Rosa; García Masabet, Violeta del Valle; Cailloux, Jonathan; Canals, Trini; Maspoch Rulduà, M. Lluïsa (Springer, 2020-01)
    Article
    Open Access
    Polylactic acid (PLA) is a biodegradable thermoplastic polymer that is presented as a good alternative to petroleum-derived plastics. Some of the major drawbacks of this material are its lack of thermal stability and rapid ...

  • Canonical analysis of the Kawabata and sliding fabric friction measurement methods 

    Capdevila Juan, Francisco Javier; Carrera Gallissà, Enric; Escusa Julian, Mercedes; Rotela Alvez, Micaela (2020)
    Article
    Open Access
    The aim of this study was to identify the latent structure and potential relationships between two sets of frictions measurements of warp-and-weft fabrics made with the sliding method and the Kawabata system (KES FB-4 ...

  • Melt-processing of cellulose nanofibril/polylactide bionanocomposites via a sustainable polyethylene glycol-based carrier system 

    Cailloux, Jonathan; Raquez, Jean-Marie; Lo Re, Giada; Santana Pérez, Orlando Onofre; Bonnaud, Leila; Dubois, Philippe; Maspoch Rulduà, M. Lluïsa (2019-08-10)
    Article
    Open Access
    Considering the appealing need for an industrially viable approach, this works aims at demonstrating the rapid and easy melt processing of Polylactide (PLA) bio-composites reinforced with cellulose nanofibrils (CNF). For ...

  • Thermodynamic and kinetic parameters of polyester dyeing with Disperse Blue 56 using bio-based auxiliaries and co-solvent microemulsion 

    Radei, Shahram; Carrión Fité, Francisco Javier; Ardanuy Raso, Mònica; Canal Arias, José María (2019-02)
    Article
    Open Access
    The aim of the study was to dye polyester fabric with a low molecular weight anthraquinone type disperse dye (C.I. Disperse Blue 56), with n-butylacetate as co-solvent in the microemulsion system and the presence of two ...

  • Una solución para el acierto de talla en las compras de moda on-line 

    Tornero García, José Antonio (2019-02-07)
    Article
    Open Access
    Descripción de un sistema para almacenar el perfil morfológico del usuario y aplicarlo después en comercio online de moda o cualquier sector cuyos productos o servicios dependan de este perfil. Financiado con el proyecto ...

  • Solvent treatment of Wet-Spun PEDOT: PSS fibers for Fiber-Based Wearable pH Sensing 

    Reid, Daniel O.; Smith, Rachel E.; García Torres, José Manuel; Watts, John F.; Crean, Carol (Multidisciplinary Digital Publishing Institute (MDPI), 2019-09)
    Article
    Open Access
    There is a growing desire for wearable sensors in health applications. Fibers are inherently flexible and as such can be used as the electrodes of flexible sensors. Fiber-based electrodes are an ideal format to allow ...

  • Direct measurement of Lighthill’s energetic efficiency of a minimal magnetic microswimmer 

    Calero, Carles; García Torres, José Manuel; Ortiz Ambriz, Antonio; Sagués Mestres, Francesc; Pagonabarraga, I.; Tierno, Prieto (2019-09-27)
    Article
    Open Access
    The realization of artificial microscopic swimmers able to propel in viscous fluids is an emergent research field of fundamental interest and vast technological applications. For certain functionalities, the efficiency ...

View more