Ponències/Comunicacions de congressos

Recent Submissions

  • Probabilistic Evaluation of Post-Earthquake Functional Recovery of a Seismically Isolated RC Building 

    Chavez Aguirre, Jean Piers Nicolas; Murcia Delso, Juan; Oliver Saiz, Maria Elena; López Almansa, Francisco (2022)
    Conference report
    Open Access
    All earthquakes throughout history have taught us that damage to non-structural elements and content has serious repercussions on the direct economic cost of damage and functionality. In essential buildings such as hospitals, ...

  • Estructura metálica: distintas normativas en la España del siglo XX. 

    Pons Poblet, Josep Maria; Arboix Alió, Alba (Instituto Juan de Herrera, 2022)
    Conference report
    Restricted access - publisher's policy
    La comunicación que se plantea, presenta sucintamente las principales normativas de la estructura metálica que, durante el siglo XX, se editaron en el estado español. Desde las iniciales normativas de cariz ferroviario, ...

  • Fire performance of residential shipping containers designed with a shaft wall system 

    Agueda Costafreda, Alba; Vacca, Pascale; Marimón Carvajal, Federico; Pastor Ferrer, Elsa; Planas Cuchi, Eulàlia (2022)
    Conference report
    Open Access
    seven story building made of shipping containers is planned to be built in Barcelona, Spain. This study mainly aimed to evaluate the fire performance of one of these residential shipping containers whose walls and ceiling ...

  • L'assignatura història de la ciència i de la tècnica a l'Escola Tècnica Superior d'Enginyeria Industrial de Barcelona (ETSEIB), trenta anys després 

    Pons Poblet, Josep Maria (2019)
    Conference report
    Open Access
    Students who started out their studies in the 1988/1989 academic year at Barcelona School of Industrial Engineering (ETSEIB) had to take the subject History of Science and Technology in the first term. This course belonged ...

  • Analysis of pallet rack beam members through a nonlinear GBT formulation with sectional constraints 

    Bonada Bo, Jordi; Casafont Ribera, Miguel; Roure Fernández, Francisco; Pastor Artigues, María Magdalena (2021)
    Conference report
    Open Access
    Thin-walled open cross-sections are commonly used in steel storage pallet rack structures. In some cases, open sections are employed as beam members. These beam members usually have weld spots along their length in order ...

  • An experimentally validated study for open rib profiles steel-concrete composite slabs behavior in partial connection 

    Soltanalipour, Milad; Ferrer Ballester, Miquel; Marimón Carvajal, Federico (2019)
    Conference report
    Open Access
    In this paper the strength of steel deck-concrete composite slabs is studied. Conventional slabs with open and dovetail profiles are studied with different designs, galvanized and stainless steel. Partial connection method ...

  • Circular economy in practice: the fenix project 

    Ahlers, Reinhard; Aionesei, Cristian; Bianchin, Alvise; Birloaga, Ionela; Bonada Bo, Jordi; DeMichelis, Ida; Kopacek, Bernd; Koutretsos, Konstantinos; Lehne, Markus; Ntalaperas, Dimitris; Panou, Maria; Pantelopoulos, Stelios; Rosa, Paolo; Smyrnakis, George; Spiliotis, Aristotelis; Stanescu, Nicolae; Terzi, Sergio; Vegliò, Francesco (2018)
    Conference report
    Restricted access - publisher's policy
    Circular economy is a concept even more exploited by governments and companies to share green principles. However, its real adoption at industrial level remains limited to either small-scaled pilot plants or appositely ...

  • Com les TIC poden ajudar a l'ensenyament de la història de la ciència 

    Pons Poblet, Josep Maria (2017)
    Conference lecture
    Open Access
    L’objectiu de la present comunicació fora presentar, dins la temàtica de les TIC en la incorporació de la història de la ciència a l’ensenyament, com l’ús d’aquestes eines pot ajudar a mostrar a l’alumnat –acostumat sens ...

  • Investigation on repairs of aircraft composite structures made with various joining techniques 

    Pitta, Siddharth; Roure Fernández, Francisco; Crespo Artiaga, Daniel; Rojas Gregorio, José Ignacio (2018)
    Conference lecture
    Restricted access - publisher's policy
    In the race for developing aircraft with lighter airframe, aiming at increasing aircraft payload and/or fuel efficiency, the shift from conventional metal structures to light-weight composite structures has attracted ...

  • Development of a multimaterial additive manufacturing process for electronic devices 

    Muguruza Blanco, Asier; Bonada Bo, Jordi; Gómez Fernández, Agustín; Minguella Canela, Joaquim; fernandes, joana; Ramos, Francisco; Xuriguera Martin, Elena; Varea Espelt, Aida; Cirera Hernandez, Albert (2017)
    Conference report
    Restricted access - publisher's policy
    In order to increase the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combin ing 3D printing technology by DLP (Digital Light Processing) with a two ...

  • Influence of exposure time on mechanical properties and photocuring conversion ratios for photosensitive materials used in additive manufacturing 

    Bonada Bo, Jordi; Muguruza Blanco, Asier; Fernández Francos, Xavier; Ramis Juan, Xavier (2017)
    Conference report
    Open Access
    The influence of UV post - curing process on mechanical properties as well as photocuring conversion ratios is presented. An analytical model to determinate the conversion ratio for frontal polymerization is used t o define ...

  • The impact of the lecturer experience on the student satisfaction 

    Berbegal Mirabent, Jasmina; Mas Machuca, Marta; Marimón Carvajal, Federico (2016)
    Conference report
    Open Access
    Purpose – The paper is twofold aimed. We first examine the relationship between teaching experience and students’ satisfaction. In a second stage we explore the mediating effect of research intensity in this relationship ...

View more