Enviaments recents

  • On the static strength of aluminium and carbon fibre aircraft lap joint repairs 

    Pitta, Siddharth; de la Mora Carles, Victor; Roure Fernández, Francisco; Crespo Artiaga, Daniel; Rojas Gregorio, José Ignacio (2018-10-01)
    Article
    Accés restringit per política de l'editorial
    The behaviour of various aircraft lap joint repair configurations is investigated experimentally and numerically under static loading. The lap joints consist of aluminium alloy (AA) 2024-T3 substrates repaired with twin ...
  • An experimental investigation of a new perfect bond technology for composite slabs 

    Ferrer Ballester, Miquel; Marimón Carvajal, Federico; Casafont Ribera, Miguel (2018-03-30)
    Article
    Accés restringit per política de l'editorial
    Steel-concrete composite slabs generally fail due to the debonding with separation of sections caused by longitudinal shear forces, regardless of the shape of the sheeting profile or the design of the embossments. This ...
  • Optimisation procedure for additive manufacturing processes based on mask image projection to improve Z accuracy and resolution 

    Bonada Bo, Jordi; Muguruza Blanco, Asier; Fernández Francos, Xavier; Ramis Juan, Xavier (Elsevier Ltd, 2018-01-04)
    Article
    Accés restringit per política de l'editorial
    Mask image projection is an additive manufacturing (AM) technique used in photocurable materials which allows the simultaneous energy delivery in a whole area instead of a single spot. A common problem for this AM process ...
  • Cálculo de estructuras reticulares. Carlos Fernández Casado 

    Pons Poblet, Josep Maria (2017-12-22)
    Article
    Accés restringit per política de l'editorial
    There are written works held in such esteem that they are purely referred to by the name of the author. This is the case of the Arguelles, the Jiménez Montoya, the Salinger and, evidently, the Fernández Casado. In this ...
  • Linear buckling analysis of perforated cold-formed steel storage rack columns by means of the generalised beam theory 

    Casafont Ribera, Miguel; Bonada Bo, Jordi; Pastor Artigues, María Magdalena; Roure Fernández, Francisco; Susín Sánchez, Antonio (2017-03)
    Article
    Accés restringit per política de l'editorial
    The investigation attempts to adapt a be am finite element procedure based on the Generalised Beam Theory (GBT) to the analysis of perforated columns. The presence of perforations is taken into account through the use of ...
  • Caracterización micromecánica de la interacción acero-hormigón en las losas mixtas mediante el uso de modelos de elementos finitos 

    Plans Pujolràs, Albert; Alamillo, David; Ferrer Ballester, Miquel; Marimón Carvajal, Federico (2017-07-14)
    Article
    Accés obert
    This study focuses on the improvement of composite slabs characterization throughout the use of advanced finite elements models. The accurate three-dimensional modelling of a full scale commercial steel sheet and concrete ...
  • Development of a multimaterial additive manufacturing process for electronic devices 

    Muguruza Blanco, Asier; Bonada Bo, Jordi; Gómez Fernández, Agustín; Minguella Canela, Joaquim; Fernándes, Joana; Ramos, Francisco; Xuriguera Martin, Elena; Varea Espelt, Aida; Cirera Hernandez, Albert (2017-10-06)
    Article
    Accés obert
    In order to increase the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combining 3D printing technology by DLP (Digital Light Processing) with a ...
  • Influence of exposure time on mechanical properties and photocuring conversion ratios for photosensitive materials used in Additive Manufacturing 

    Bonada Bo, Jordi; Muguruza Blanco, Asier; Fernández-Francos, Xavier; Ramis Juan, Xavier (2017-10-06)
    Article
    Accés obert
    The influence of UV post-curing process on mechanical propertie s as well as photocuring conversion ratios is presented. An analytical model to determ inate the conversion ratio for frontal polymerization is used to define ...
  • Development of a multi-material additive manufacturing process for electronic devices 

    Muguruza Blanco, Asier; Bonada Bo, Jordi; Gómez, Agustin; Minguella Canela, Joaquim; Fernandes, Joana; Ramos, Francisco; Xuriguera Martin, Elena; Varea Espelt, Aida; Cirera Hernandez, Albert (2017-10-06)
    Article
    Accés obert
    In order to increas e the versatility of additive manufacturing multimaterial processes, a hybrid system has been developed, which is capable of combining 3D printing technology by DLP (Digital Light Processing) with a two ...
  • Is research mediating the relationship between teaching experience and student satisfaction? 

    Berbegal Mirabent, Jasmina; Mas Machuca, Marta; Marimón Carvajal, Federico (Taylor & Francis, 2016-07-05)
    Article
    Accés restringit per política de l'editorial
    Universities must ensure that academic staff are qualified and competent for performing their job. Teaching and research are two key activities in which lecturers should excel. While some authors suggest teaching and ...
  • Distortional influence of pallet rack uprights subject to combined compression and bending 

    Bonada Bo, Jordi; Pastor Artigues, María Magdalena; Roure Fernández, Francisco; Casafont Ribera, Miguel (Elsevier, 2016-05-24)
    Article
    Accés obert
    A pallet rack is a structure in which the beams and uprights are cold-formed steel sections. The beam-upright connections are normally clipped in order to select the beam levels required and for ease of assembly. For this ...
  • Mecánica elástica, por A. Peña Boeuf. noventa años después 

    Pons Poblet, Josep Maria (2016-06-01)
    Article
    Accés obert
    En el número 2427 de la Revista de Obras Públicas, correspondiente al año 1925, apareció un breve artículo1 escrito por un desconocido M. donde se glosaba la notable obra de Mecánica Elástica escrita por el reputado Ingeniero ...

Mostra'n més