Análisis de la formación de uniones inter e intra capa en termoplásticos elastoméricos procesados por la técnica de impresión 3D de extrusión de material
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/378278
Tipus de documentText en actes de congrés
Data publicació2022
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 4.0 Internacional
Abstract
3D printing is a layer-by-layer manufacturing process with great potential in a large number of areas, for instance in technological and biomedical fields. Specifically, the Material Extrusion (MEX) technique, also known as Fused Filament Fabrication (FFF), has generated interest in industry and research due to its capabilities for manufacturing complex geometries. The purpose of this investigation is the characterization of inter and intra layer bondings created in four elastomeric thermoplastics of different polymer bases used in MEX. These copolymers are of great utility due to their good mechanical behavior and deformation ability. In this study, three manufacturing parameters have been considered: layer height, extrusion speed and temperature. The results show differences in behavior between copolymers and a strong influence of these manufacturing parameters: there is an existing relationship between printing velocity and extruding temperature. The presented methodology has proven to be an effective tool to identify the effects of parameters on filament bonding.
CitacióAdrover, B. [et al.]. Análisis de la formación de uniones inter e intra capa en termoplásticos elastoméricos procesados por la técnica de impresión 3D de extrusión de material. A: CIBIM 2022 - XV Congreso Iberoamericano de Ingeniería Mecánica. "Actas del Congreso CIBIM 2022". 2022, p. 1-8.
Versió de l'editorhttps://cibim2022.com/cibim2022/programa/resumenes-aceptados
Col·leccions
- Departament de Ciència i Enginyeria de Materials - Ponències/Comunicacions de congressos [79]
- Departament d'Enginyeria mecànica - Ponències/Comunicacions de congressos [479]
- TECNOFAB - Grup de Recerca en Tecnologies de Fabricació - Ponències/Comunicacions de congressos [77]
- Doctorat en Enginyeria Mecànica, Fluids i Aeronàutica - Ponències/Comunicacions de congressos [54]
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
166-Manuscript-CIBIM_2022_Adrover-def-rev.pdf | 503,9Kb | Visualitza/Obre |