Analysis of automotive thermal management heat exchangers
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/375250
Tipus de documentProjecte Final de Màster Oficial
Data2022-09-12
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-CompartirIgual 3.0 Espanya
Abstract
This work is focused on a specific application in the field of heat exchangers, and that is a vehicle radiator. Specifically, the project consists of the design and implementation of a code using the MATLAB environment to simulate the thermal behavior of a typical aluminum louvered fin automotive radiator. The methodology used to solve the equations is the ε-NTU and multi ε-NTU method. The working conditions and detailed geometry are defined, and it is explained the algorithm used to solve the problem, and also the specific correlations selected for the calculation of heat transfer and pressure loss, for this kind of heat exchangers. Beyond simulation part, it is also studied the State-of-the-Art of automotive radiators, to have an idea on the recent ideas, methods and ultimate technology applied in this field. In this part it can be seen some very different technologies implemented, which all of them are focused on improving the thermal performance of vehicle radiators. Taking into account the State-of-the-art part, it is implemented one of these novel technologies to the simulation developed in the project. In this case, it is the use of a nanofluid as a coolant in the radiator, with the aim of improving the thermal behavior. Specifically, the nanofluid used in the simulation is water + Al2O3 nanoparticles. The results obtained with the code developed show the heat transfer behavior of the radiator for certain mass flow rates conditions, and they are compared with other experimental results, demonstrating that the code works well enough, despite that the obtained results could be more accurate. The results for the implementation of nanofluid coolant in the simulation also show a clear improvement in the heat transfer rate
MatèriesAutomobiles -- Motors -- Cooling systems -- Design and construction, Automobiles -- Radiators -- Tests -- Computer simulation, Automòbils -- Motors -- Sistemes de refrigeració -- Disseny i construcció, Automòbils -- Radiadors -- Proves -- Simulació per ordinador
TitulacióMÀSTER UNIVERSITARI EN ENGINYERIA TÈRMICA (Pla 2020)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
report-palacios-ernest-definitiu.pdf | 2,532Mb | Visualitza/Obre |